ACwing ESC1S A

andrea-cirillo·ACwing_flight_controller_hw·02 - ESC_1S_KiCadProj/ACwing_ESC1S_A.kicad_pcb

ACwing ESC1S A PCB layout, top view — open source STM32 board by andrea-cirillo

About the ACwing ESC1S A PCB

ACwing ESC1S A is an open source STM32 PCB design by andrea-cirillo, published on GitHub. It is a 4-layer board measuring 40.8 × 40.8 mm, with 45 components from 29 distinct parts.

Its main chip is the STM32WB55CGU6, from the STM32 family. Other key parts include the LSM6DSV16XTR. By type, the board carries 16 resistors, 9 capacitors, 6 diodes, 5 transistors, 4 modules and 3 connectors.

It belongs with the robotics & motion and rf & radio designs in this gallery.

From the project

ACwing is a modular set of PCBs for small multirotors.

Project: ACwing · Author: Andrea Cirillo

KiCad 7 sources of the ACwing ESC 1S rev A board (they also open in KiCad 8/9). The board description, schematic PDF, BoM, JLCPCB files, Gerber, STEP and board views are in 00 - Docs/01 - ESC1SDocs.

Main components on the ACwing ESC1S A

ACwing ESC1S A bill of materials (BOM)

45 components, 29 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LSM6DSV16XTR
TSC213
STMicroelectronics
U1
1
STM32WB55CGU6
STC4054GR
STMicroelectronics
U2
4
coreless 8520
M1, M2, M3, M4
4
AON7524
Q1, Q2, Q3, Q4
1
AO3401A
AON7423
Alpha & Omega Semiconductor
Q5
1
TYPE-C-31-M-12
ESC link
HRO (Korea Hroparts)
J1
1
BATT 1S
JST
J2
1
USB-C (HRO TYPE-C-31-M-12)
JST
J4
4
WS2812B-2020
STPS3L45AF
Worldsemi
D1, D2, D3, D4
1
RB521S30
D5
1
green
D6
1
CL05B104KO5NNNC
470uF 6.3V polymer
Samsung Electro-Mechanics
C1
1
1206B475K500NT
10uF 10V
FH (Guangdong Fenghua)
C2
3
10uF 10V
C3, C4, C5
1
CL31A107MQHNNNE
100nF
Samsung Electro-Mechanics
C6
1
CL10A475KO8NNNC
100nF
Samsung Electro-Mechanics
C7
1
CL05A105KA5NQNC
1uF
Samsung Electro-Mechanics
C8
1
CL10A475KO8NNNC
4.7uF 10V
Samsung Electro-Mechanics
C9
1
22R
R1
2
0402WGF1003TCE
22R
UNI-ROYAL
R2, R4
Show 9 more
QtyPartRefs
1
RC-02K2873FT
22R
FH (Guangdong Fenghua)
R3
3
100k
R5, R6, R7
2
0402WGF1003TCE
100k
UNI-ROYAL
R8, R11
1
0402WGF1002TCE
2m
UNI-ROYAL
R9
1
0402WGF1003TCE
1k
UNI-ROYAL
R10
2
0402WGF5101TCE
5.1k
UNI-ROYAL
R12, R13
1
0402WGF1002TCE
2.2k 1%
UNI-ROYAL
R14
1
0402WGF2201TCE
1k
UNI-ROYAL
R15
1
0402WGF2201TCE
1R
UNI-ROYAL
R16

ACwing ESC1S A design files

The KiCad project lives in the andrea-cirillo/ACwing_flight_controller_hw repository on GitHub; these links point at the commit this page was built from.

ACwing ESC1S A: common questions

What microcontroller does the ACwing ESC1S A use?

The ACwing ESC1S A is built around the STM32WB55CGU6, from the STM32 family.

How big is the ACwing ESC1S A PCB?

The ACwing ESC1S A measures 40.8 × 40.8 mm, has 4 copper layers and is 1 mm thick.

How many components are on the ACwing ESC1S A?

45 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ACwing ESC1S A design files?

From the andrea-cirillo/ACwing_flight_controller_hw repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ACwing ESC1S A design in my own project?

The repository has no license, so all rights stay with andrea-cirillo. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ACwing ESC1S A without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in ACwing_flight_controller_hw

Similar boards