33 open source boards using the LSM6DSV16XTR
Real designs built with the LSM6DSV16XTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 44 partsRP2040/RP2350
Chesapeake
dashs20
44 partsNo license73 Nordic nRF
Locus
Nieko27
40 × 40 mm50 parts4LCERN-OHL-S-2.060STM32
TekTag BioSensor
teklabsdigital
26 × 25 mm77 parts6LMIT19RP2040/RP2350
MokyaLora
tengigabytes
66 × 105 mm328 parts6LCustom license7ESP32
Kompic Mk1b
porupski
44.5 × 50.6 mm121 parts4LGPL-3.03ESP32
Totem compass
ljagiello
45.8 × 46.4 mm137 parts4LApache-2.00Indieduck
armature-ai-labs
65 × 30.9 mm125 parts4LApache-2.00STM32
ACwing FC A
ACwing-UAV
40.8 × 40.8 mm98 parts4LNo license0STM32
ACwing FC A
andrea-cirillo
40.8 × 40.8 mm97 parts4LNo license0STM32
ACwing FC A
andrea-cirillo
40.8 × 40.8 mm97 parts4LNo license0STM32
FC-DRON-P3
Lucas-el-pato
40.7 × 40.7 mm71 parts6LNo license0Minicontrol
Jotrorox
50 × 36 mm58 parts4LBSD-2-Clause0Nordic nRF
Slim-Sleep-Tracker
NicholasKorth
31.8 × 15.3 mm57 parts4LCC-BY-NC-4.00NXP
Roboracing micromouse
RoboJackets
97.5 × 75 mm57 parts4LNo license0RP2040/RP2350
Knuckles imu lsm6-lis2-rp2354a
jakeread
20 × 21.5 mm43 parts4LCERN-OHL-S-2.00Contapassi-V1
daniele-boerio
24 × 41 mm27 parts4LNo license0U pen
TheAbsoluteMin
130.5 × 16.8 mm24 parts4LMIT0IMU BREAKOUT BOARD
riccardo-ops
50.5 × 38.5 mm23 parts4LNo license0- schematic only · 44 partsRP2040/RP2350
Custom-MCU
Yuvi-3
44 partsNo license0 ESP32
Primis FaceTracker
Nieko27
95 × 48 mm44 parts2LCERN-OHL-S-2.060ESP32
Kompic Mk1
porupski
44.5 × 50.6 mm119 parts4LGPL-3.03Wand
JMET04
15 × 80 mm21 parts4LMIT1STM32
ACwing ESC1S A
andrea-cirillo
40.8 × 40.8 mm45 parts4LNo license0STM32
ACwing ESC1S A
andrea-cirillo
40.8 × 40.8 mm45 parts4LNo license0STM32
ACwing ESC1S A
ACwing-UAV
40.8 × 40.8 mm45 parts4LNo license0Nordic nRF
Board 1
Triksha-health
54.7 × 50 mm38 parts4LNo license0STM32
ACwing Flow A
ACwing-UAV
21 × 25 mm30 parts2LNo license0STM32
ACwing Flow A
andrea-cirillo
21 × 25 mm30 parts2LNo license0STM32
ACwing Flow A
andrea-cirillo
21 × 25 mm30 parts2LNo license0ACwing GPS A
andrea-cirillo
30 × 30 mm15 parts2LNo license0ACwing GPS A
andrea-cirillo
30 × 30 mm15 parts2LNo license0ACwing GPS A
ACwing-UAV
30 × 30 mm15 parts2LNo license0Microduck IMU 3V3 Prototype
ldcyes
24 × 18 mm8 parts2LNo license0
How designs wire the LSM6DSV16XTR
Read from the KiCad layouts of 20 open source designs, one per repository: what each pin of the LSM6DSV16XTR connects to, and the resistors, capacitors and other passives placed on it.
- The VDD_IO pin has a decoupling capacitor on 15 of 20 designs, most often 100 nF (then 10 µF).
- The VDD pin has a decoupling capacitor on 15 of 17 designs, most often 100 nF (then 1 µF).
- The SDX/AH1/QVAR1 pin is tied to GND on 14 of 20 designs (not connected on 2, a signal on 4).
- The OCS_AUX pin is left unconnected on 13 of 17 designs (1.8V on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SDX/AH1/QVAR1pin 2 | Connected to: GND 70% · a signal 20% | — |
| VDD_IOpin 5 | Connected to: 3.3V 95% |
|
| GNDpin 6, 7 | Connected to: GND 92% | — |
| VDDpin 8 | Connected to: 3.3V 94% |
|
| OCS_AUXpin 10 | Connected to: Not connected 76% · 1.8V 18% | — |
| SDO_AUXpin 11 | Connected to: Not connected 76% · 1.8V 18% | — |
| CSpin 12 | Connected to: 3.3V 47% · a signal 47% |
|
| SCLpin 13 | Connected to: The microcontroller 41%, a connector 24% |
|
| SDApin 14 | Connected to: The microcontroller 41%, a connector 24% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Locus by Nieko27, TekTag BioSensor by teklabsdigital, MokyaLora by tengigabytes and Kompic Mk1 by porupski.
The LSM6DSV16XTR in open source designs
The gallery holds 33 open source boards using the LSM6DSV16XTR from 22 GitHub repositories; a typical one measures about 40.8 × 40.7 mm and carries around 45 components.
74% use four copper layers or more, and 33% carry an open source license.
The most starred is Chesapeake by dashs20.
Parts used alongside the LSM6DSV16XTR
Microcontrollers on boards using the LSM6DSV16XTR
What boards using the LSM6DSV16XTR are built for
LSM6DSV16XTR: common questions
Where can I find a LSM6DSV16XTR reference design?
Each of the 33 boards on this page is a real design using the LSM6DSV16XTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LSM6DSV16XTR VDD_IO pin?
The VDD_IO pin has a decoupling capacitor on 15 of 20 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 20 open source designs using the LSM6DSV16XTR.
What decoupling capacitors do designs use on the LSM6DSV16XTR VDD pin?
The VDD pin has a decoupling capacitor on 15 of 17 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 20 open source designs using the LSM6DSV16XTR.
How is the LSM6DSV16XTR SDX/AH1/QVAR1 pin connected?
The SDX/AH1/QVAR1 pin is tied to GND on 14 of 20 designs (not connected on 2, a signal on 4). Counted from the KiCad layouts of 20 open source designs using the LSM6DSV16XTR.
What parts are used alongside the LSM6DSV16XTR?
The USBLC6-2SC6, AP2112K-3.3TRG1, MLPF-WB55-01E3, IIS2MDCTR and LD39130SPUR appear in the most repositories here.
Which microcontrollers do boards using the LSM6DSV16XTR use?
Most are built on STM32 (11), ESP32 (4), RP2040/RP2350 (4) and Nordic nRF (3).
How big is a typical board using the LSM6DSV16XTR?
The median is 40.8 × 40.7 mm, and 26% are two-layer designs.
What is the most popular open source board using the LSM6DSV16XTR?
By GitHub stars, Chesapeake by dashs20, with 73 stars.
Can I simulate one of these boards using the LSM6DSV16XTR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.