13 open source boards using the STM32WB55CGU6
Real designs built with the STM32WB55CGU6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
PCB Real-Time-Power-Monitoring-System-Development sensor
NguyenThanhHuy-debug
101.6 × 50.8 mm122 parts2LNo license2STM32
ACwing FC A
ACwing-UAV
40.8 × 40.8 mm98 parts4LNo license0STM32
ACwing FC A
andrea-cirillo
40.8 × 40.8 mm97 parts4LNo license0STM32
ACwing FC A
andrea-cirillo
40.8 × 40.8 mm97 parts4LNo license0STM32
Stm32 flight controller hw
andrea-cirillo
40 × 40 mm96 parts4LNo license0STM32
A.ProdDeck
arsovskiteodor
117 × 77 mm61 parts4LNo license0STM32
Bluetooth-Board
phancak
65 × 65 mm55 parts4LMIT0STM32
ACwing ESC1S A
andrea-cirillo
40.8 × 40.8 mm45 parts4LNo license0STM32
ACwing ESC1S A
andrea-cirillo
40.8 × 40.8 mm45 parts4LNo license0STM32
ACwing ESC1S A
ACwing-UAV
40.8 × 40.8 mm45 parts4LNo license0STM32
ACwing Flow A
ACwing-UAV
21 × 25 mm30 parts2LNo license0STM32
ACwing Flow A
andrea-cirillo
21 × 25 mm30 parts2LNo license0STM32
ACwing Flow A
andrea-cirillo
21 × 25 mm30 parts2LNo license0
How designs wire the STM32WB55CGU6
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the STM32WB55CGU6 connects to, and the resistors, capacitors and other passives placed on it.
- The VBAT pin has a decoupling capacitor on 4 of 7 designs, most often 100 nF (then 4.7 µF).
- The PH3-BOOT0 pin has a capacitor to GND on 4 of 7 designs, most often 1 µF (then 100 nF).
- The VDDA pin has a decoupling capacitor on 4 of 4 designs, most often 100 nF (then 1 µF).
- The VDD_1 pin has a decoupling capacitor on 4 of 4 designs, most often 100 nF (then 100 pF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 1 | Connected to: 3.3V 57% · a signal 43% |
|
| PH3-BOOT0pin 4 | Connected to: Signal 57% · VBUS 43% |
|
| PB8pin 5 | Connected to: Signal 71% · not connected 29% |
|
| NRSTpin 7 | Connected to: A connector 75% |
|
| VDDApin 8 | Connected to: 3.3V 75% · a signal 25% |
|
| PA0pin 9 | Connected to: Signal 75% · not connected 25% |
|
| VDD_1pin 20 | Connected to: 3.3V 100% |
|
| RF1pin 21 | Connected to: Signal 100% |
|
| VSSRFpin 22 | Connected to: GND 100% | — |
| VDDRFpin 23 | Connected to: 3.3V 100% |
|
| OSC_OUTpin 24 | Connected to: Signal 100% |
|
| OSC_INpin 25 | Connected to: Signal 100% |
|
| AT0pin 26 | Connected to: Not connected 100% | — |
| AT1pin 27 | Connected to: Not connected 100% | — |
| VFBSMPSpin 31 | Connected to: Signal 75% · 3.3V 25% |
|
| VSSSMPSpin 32 | Connected to: GND 100% | — |
| VLXSMPSpin 33 | Connected to: Signal 100% |
|
| VDDSMPSpin 34 | Connected to: 3.3V 100% |
|
| VDD_2pin 35 | Connected to: 3.3V 100% |
|
| VDDUSBpin 40 | Connected to: 3.3V 100% |
|
| VDD_3pin 48 | Connected to: 3.3V 100% |
|
| GNDpin 49 | Connected to: GND 100% | — |
27 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PCB Real-Time-Power-Monitoring-System-Development sensor by NguyenThanhHuy-debug, ACwing ESC1S A by ACwing-UAV, ACwing ESC1S A by andrea-cirillo and ACwing ESC1S A by andrea-cirillo.
The STM32WB55CGU6 in open source designs
The gallery holds 13 open source boards using the STM32WB55CGU6 from 7 GitHub repositories; a typical one measures about 40.8 × 40.8 mm and carries around 55 components.
69% use four copper layers or more, and 8% carry an open source license.
The most starred is PCB Real-Time-Power-Monitoring-System-Development sensor by NguyenThanhHuy-debug.
Parts used alongside the STM32WB55CGU6
Microcontrollers on boards using the STM32WB55CGU6
What boards using the STM32WB55CGU6 are built for
STM32WB55CGU6: common questions
Where can I find a STM32WB55CGU6 reference design?
Each of the 13 boards on this page is a real design using the STM32WB55CGU6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the STM32WB55CGU6 VBAT pin?
The VBAT pin has a decoupling capacitor on 4 of 7 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 7 open source designs using the STM32WB55CGU6.
How is the STM32WB55CGU6 PH3-BOOT0 pin connected?
The PH3-BOOT0 pin has a capacitor to GND on 4 of 7 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the STM32WB55CGU6.
What decoupling capacitors do designs use on the STM32WB55CGU6 VDDA pin?
The VDDA pin has a decoupling capacitor on 4 of 4 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the STM32WB55CGU6.
What parts are used alongside the STM32WB55CGU6?
The USBLC6-2SC6, LD39130SPUR, MLPF-WB55-01E3, IIS2MDCTR and LDK130PU-R appear in the most repositories here.
Which microcontrollers do boards using the STM32WB55CGU6 use?
Most are built on STM32 (13).
How big is a typical board using the STM32WB55CGU6?
The median is 40.8 × 40.8 mm, and 31% are two-layer designs.
What is the most popular open source board using the STM32WB55CGU6?
By GitHub stars, PCB Real-Time-Power-Monitoring-System-Development sensor by NguyenThanhHuy-debug, with 2 stars.
Can I simulate one of these boards using the STM32WB55CGU6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.