TR-WCOMM

AndreiWavelet·TR-WCOMM·Circuit/TR-WCOMM.kicad_pcb

TR-WCOMM PCB layout, top view — open source STM32 board by AndreiWavelet

About the TR-WCOMM PCB

TR-WCOMM is an open source STM32 PCB design by AndreiWavelet, published on GitHub. It is a 4-layer board measuring 48.9 × 33 mm, with 56 components from 33 distinct parts.

Its main chip is the STM32L041K6Tx, from the STM32 family. Other key parts include the TLV75533PDBV and nRF24L01P. By type, the board carries 24 capacitors, 13 resistors, 4 connectors, 4 diodes, 4 inductors and 3 ICs.

It belongs with the iot & wireless and rf & radio designs in this gallery.

From the project

Wireless file transfer based on STM32L051 and NRF24L01+.

The device is a small PCB with three LEDs in green, yellow and red, a push button, a SD Card socket and a U.FL antenna connector. There is space for mounting a battery connector ou directly soldering battery leads to the PCB.

Once there is power, the user must connect the antenna and the SD Card press once the push button. All three leds will flash thrice, indicating that the device is on. Then, the user can press the button briefly (<1s) to activate the file transmission. Another identical device can be used to receive the file. If the user presses the button for more than 3s, it will power…

TR-WCOMM, from the project README
From the project README

Main components on the TR-WCOMM

TR-WCOMM bill of materials (BOM)

56 components, 33 distinct parts.

QtyPartRefs
1
STM32L041K6Tx
U1
1
TLV75533PDBV
U2
1
nRF24L01P
U3
2
DMG2301L
Q1, Q2
1
16M
Y1
1
Conn_01x02
J1
1
Conn_01x04
J2
1
Conn_Coaxial
J3
1
Micro_SD_Card_Det
J4
1
SW_Push
SW1
1
LED G
D1
1
LED Y
D2
1
LED R
D3
1
BAS19
D4
1
10u
L1
1
2.7n
L2
1
8.2n
L3
1
3.9n
L4
8
2u
C1, C4, C6, C8, C9, C17, C21, C23
8
100n
C2, C3, C5, C18, C19, C20, C22, C24
Show 13 more
QtyPartRefs
1
1n
C7
1
33n
C10
2
24p NPO
C11, C14
1
2.2n
C12
1
4.7p NPO
C13
1
1.5p NPO
C15
1
1p NPO
C16
3
100
R1, R2, R3
5
10k
R4, R6, R10, R11, R12
1
200k
R5
2
100k
R7, R13
1
570K
R8
1
22k
R9

TR-WCOMM design files

The KiCad project lives in the AndreiWavelet/TR-WCOMM repository on GitHub; these links point at the commit this page was built from.

TR-WCOMM: common questions

What microcontroller does the TR-WCOMM use?

The TR-WCOMM is built around the STM32L041K6Tx, from the STM32 family.

How big is the TR-WCOMM PCB?

The TR-WCOMM measures 48.9 × 33 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the TR-WCOMM?

56 components, from 33 distinct parts. The full bill of materials is listed on this page.

Where can I download the TR-WCOMM design files?

From the AndreiWavelet/TR-WCOMM repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the TR-WCOMM design in my own project?

The repository has no license, so all rights stay with AndreiWavelet. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the TR-WCOMM without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards