31 open source boards using the nRF24L01P
Real designs built with the nRF24L01P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Kottoruwa hardware
bandakkalokka
317.5 × 134.6 mm229 parts4LGPL-3.012Ass shield
immortalserg
79.6 × 79.6 mm200 parts2LNo license12STM32
VESC-6
veazhang
62 × 60 mm143 parts4LNo license4STM32
RF-to-USB
RemiFM
50 × 20 mm52 parts4LMIT4ESP32
Moles integ dtu hw
the78mole
87 × 68 mm76 parts2LTAPR-OHL-1.02STM32
R.F.-Transceiver
ad-astra-et-ultra
54.6 × 20.8 mm38 parts4LMIT2ESP32
PCB V3.1
Jonathan-0101
80 × 160 mm287 parts4LGPL-3.01STM32
SPACE-DRIVE
msglazer
62 × 60 mm143 parts4LNo license1STM32
PCB DRONE C8
ArduProject
102 × 49 mm140 parts4LMIT1STM32
Wand
ayuusweetfish
63.2 × 23.9 mm65 parts2LCERN-OHL-S-2.01STM32
STM32-RF
AmziSys
39 × 15 mm38 parts4LNo license1RP2040/RP2350
Saturn60
Charading
285 × 94.6 mm305 parts4LNo license0ESP32
Robotpcbv1
NIKOLAI-GOGOL444
52.1 × 52.1 mm85 parts4LApache-2.00RP2040/RP2350
RC-Transmitter
Yarnemeuris
100 × 75 mm83 parts4LNo license0STM32
Microbot
Rishabh416
42.3 × 42.3 mm68 parts2LNo license0Microchip SAM
Lupo Testing
CalPolySpaceSystems
71.1 × 34.9 mm57 parts2LNo license0STM32
TR-WCOMM
AndreiWavelet
48.9 × 33 mm56 parts4LNo license0STM32
ST RF
amaraoussama94
41.7 × 16.6 mm38 parts4LNo license0NRF24
sneakylizard123-4
50 × 30 mm38 parts4LCERN-OHL-P-2.00STM32
RF-Design
unaldevelopment
39.8 × 17.2 mm36 parts4LMIT0STM32
Resistance-Telemetry
ayuusweetfish
32.8 × 17 mm33 parts2LNo license0Ass shield (2-я копия)
immortalserg
80 × 80 mm193 parts2LNo license12ESP32
PCB V2.2 PreAutoRoute
Jonathan-0101
80 × 161 mm286 parts4LGPL-3.01ESP32
SwervecontrollerPCBv1
NIKOLAI-GOGOL444
112 × 53.9 mm65 parts4LApache-2.00Microchip SAM
MicroRek
CalPolySpaceSystems
71.1 × 34.9 mm57 parts2LNo license0Ass shield (1-я копия)
immortalserg
80 × 80 mm151 parts2LNo license12ESP32
PCB V2.2 PreAutoRoute DimChange
Jonathan-0101
80 × 161 mm286 parts4LGPL-3.01Ass shield analog mic
immortalserg
80 × 80 mm147 parts2LNo license12STM32
STRF
AronAyub
39 × 15 mm38 parts4LNo license6ESP32
PCB V2.4 Backup
Jonathan-0101
80 × 161 mm286 parts4LGPL-3.01STM32
STRF Panel
AronAyub
39 × 31 mm38 parts4LNo license6
How designs wire the nRF24L01P
Read from the KiCad layouts of 22 open source designs, one per repository: what each pin of the nRF24L01P connects to, and the resistors, capacitors and other passives placed on it.
- The XC2 pin has a crystal on 22 of 22 designs, most often 16 MHz.
- The XC1 pin has a crystal on 22 of 22 designs, most often 16 MHz.
- The VDD_PA pin has a inductor on 22 of 22 designs, most often 2.7 nH (then 2.3 nH).
- The ANT1 pin has a inductor on 22 of 22 designs, most often 8.2 nH (then 2.7 nH).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 7, 15, 18 | Connected to: 3.3V 95% |
|
| VSSpin 8, 14, 17, 20 | Connected to: GND 100% | — |
| XC2pin 9 | Connected to: Signal 100% |
|
| XC1pin 10 | Connected to: Signal 100% |
|
| VDD_PApin 11 | Connected to: Signal 91% |
|
| ANT1pin 12 | Connected to: Signal 100% |
|
| ANT2pin 13 | Connected to: Signal 100% |
|
| IREFpin 16 | Connected to: Signal 100% |
|
| DVDDpin 19 | Connected to: Signal 100% |
|
7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Kottoruwa hardware by bandakkalokka, Ass shield by immortalserg, STRF by AronAyub and RF-to-USB by RemiFM.
The nRF24L01P in open source designs
The gallery holds 31 open source boards using the nRF24L01P from 22 GitHub repositories; a typical one measures about 71.1 × 52.1 mm and carries around 76 components.
68% use four copper layers or more, and 45% carry an open source license.
The most starred is Kottoruwa hardware by bandakkalokka.
Parts used alongside the nRF24L01P
Microcontrollers on boards using the nRF24L01P
What boards using the nRF24L01P are built for
nRF24L01P: common questions
Where can I find a nRF24L01P reference design?
Each of the 31 boards on this page is a real design using the nRF24L01P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the nRF24L01P XC2 pin connected?
The XC2 pin has a crystal on 22 of 22 designs, most often 16 MHz. Counted from the KiCad layouts of 22 open source designs using the nRF24L01P.
How is the nRF24L01P XC1 pin connected?
The XC1 pin has a crystal on 22 of 22 designs, most often 16 MHz. Counted from the KiCad layouts of 22 open source designs using the nRF24L01P.
How is the nRF24L01P VDD_PA pin connected?
The VDD_PA pin has a inductor on 22 of 22 designs, most often 2.7 nH (then 2.3 nH). Counted from the KiCad layouts of 22 open source designs using the nRF24L01P.
What parts are used alongside the nRF24L01P?
The USBLC6-2SC6, RFX2401C, XC6206P332MR, AMS1117-3.3 and STM32L432KBU6 appear in the most repositories here.
Which microcontrollers do boards using the nRF24L01P use?
Most are built on STM32 (15), ESP32 (7), RP2040/RP2350 (2) and Microchip SAM (2).
How big is a typical board using the nRF24L01P?
The median is 71.1 × 52.1 mm, and 32% are two-layer designs.
What is the most popular open source board using the nRF24L01P?
By GitHub stars, Kottoruwa hardware by bandakkalokka, with 12 stars.
Can I simulate one of these boards using the nRF24L01P before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.