HardLabs

Programador

andresR8·Robotics4Control·HardwareFiles/CentralControllerBoard/Programador.kicad_pcb

Programador PCB layout, top view — open source AVR/Arduino board by andresR8

About the Programador PCB

Programador is an open source AVR/Arduino PCB design by andresR8, published on GitHub. It is a 2-layer board measuring 25.2 × 42 mm, with 19 components from 13 distinct parts.

Its main chip is the AT90USB162-A, from the AVR/Arduino family. Other key parts include the NRF24L01. By type, the board carries 6 capacitors, 4 resistors, 2 ICs, 2 connectors, 2 switches and 2 diodes.

It belongs with the robotics & motion designs in this gallery.

From the project

A mini-sized robot for investigation in robotics and control systems

Main components on the Programador

AT90USB162-ANRF24L01

Programador bill of materials (BOM)

19 components, 13 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AT90USB162-A
Atmel
IC1
1
NRF24L01
U2 NRF24L01
1
16MHZ
ECS Inc.
X1
1
CONN_4
P1
1
CONN_3X2
Sullins Connector Solutions
P2
2
SW_PUSH
TE Connectivity
SW1, SW2
2
LED
Kingbright
D1, D2
2
22PF
22pF
Wurth Electronics
C1, C2
2
0.1UF
0.1uF
Yageo
C3, C6
1
1UF
1uF
Vishay / Vitramon
C4
1
10UF
10uF
Wurth Electronics Inc
C5
2
10K
10k
ROHM Semiconductor
R1, R3
2
430
Yageo
R2, R4

Programador design files

The KiCad project lives in the andresR8/Robotics4Control repository on GitHub; these links point at the commit this page was built from.

Programador: common questions

What microcontroller does the Programador use?

The Programador is built around the AT90USB162-A, from the AVR/Arduino family.

How big is the Programador PCB?

The Programador measures 25.2 × 42 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Programador?

19 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Programador design files?

From the andresR8/Robotics4Control repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Programador design in my own project?

The repository has no license, so all rights stay with andresR8. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Programador without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Robotics4Control

Similar boards