41 open source boards using the NRF24L01
Real designs built with the NRF24L01, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
Parthiv pcb v2
dddrrreee
66.9 × 46.6 mm30 parts2LNo license13Raspberry Pi
Cs240lx-24spr
dddrrreee
66.9 × 46.6 mm30 parts2LNo license9Microchip SAM
SensebenderGW
mysensors
50 × 50 mm70 parts2LNo license7AVR/Arduino
BOX-2252
fallberg
50.5 × 70 mm60 parts2LCERN-OHL-1.27ESP32
Esp
0Zane
100 × 80 mm82 parts2LMIT6Allen wireless
allenyin
55.6 × 33 mm113 partsNo license5STM32
MITE-ESC
SySch415
40 × 50 mm70 parts4LMIT5AVR/Arduino
MainBoard
andresR8
55.6 × 64 mm41 parts2LNo license5Raspberry Pi
Parthiv pcb v2
dddrrreee
66.9 × 46.6 mm30 parts2LMIT5AVR/Arduino
EasyPCB 10 nrf24l01p
sundberg84
50 × 49.9 mm30 parts2LNo license5ESP8266
SHMod24
LeoDJ
49.5 × 49.5 mm64 parts2LMIT3AVR/Arduino
Mini-BT-Pcb-328P
d-diot
55 × 35 mm48 parts2LNo license3STM32
Floppy-Ant-Controller
FloppyO1
65 × 60 mm53 parts2LCERN-OHL-S-2.02Microchip SAM
SensebenderMicro2
tbowmo
21.5 × 32 mm40 parts2LNo license2AVR/Arduino
VoidLens-DIY-VR-Headset-V2
scattercat-123
44.4 × 60.3 mm79 parts2LNo license1STM32
TITAN Board 2022
hpvdt
65 × 56 mm69 parts2LNo license1AVR/Arduino
OLnodeV05
ktt-ol
36.8 × 45 mm23 parts2LNo license1Diseno Mecatronico
DarielPerez
15.5 × 21.2 mm21 parts2LNo license1STM32
Flight-Computer
jainamnahar14surat
50 × 50 mm72 parts6LMIT0AVR/Arduino
Main cart
yinipi
95.1 × 85.4 mm68 parts2LNo license0STM32
Downlink
hpvdt
65 × 56 mm51 parts2LNo license0ESP32
ESP RFLINK
Tommy270502
42 × 49.9 mm40 parts4LMIT0AVR/Arduino
2024.03.15 AVR SCORE BOARD RCV v2
jarwyg
72.2 × 61.5 mm39 parts2LMIT0Raspberry Pi
Parthiv pcb v2
RobertChenKFC
66.9 × 46.6 mm30 parts2LNo license0Thays Nivar
ThaysNivar
17 × 25.8 mm21 parts2LNo license0Nrf24l01-radio
Hung-Chi970104
26.4 × 16.9 mm19 parts2LNo license0AVR/Arduino
Receiver
navneet-krishna
100 × 90 mm7 parts2LNo license0AVR/Arduino
LE-BOX-0028
fallberg
76 × 96 mm60 parts2LCERN-OHL-1.27AVR/Arduino
EasyPCB 10 nrf24l01pbackupremove
sundberg84
50 × 49.9 mm30 parts2LNo license5AVR/Arduino
Programador
andresR8
25.2 × 42 mm19 parts2LNo license5STM32
TITAN Board
hpvdt
65 × 56 mm58 parts2LNo license1AVR/Arduino
OLnodeV05 doppelt
ktt-ol
36.8 × 45 mm23 parts2LNo license1Radio
Hung-Chi970104
26.4 × 16.9 mm19 parts2LNo license1AVR/Arduino
2024.03.15 AVR SCORE BOARD TX v2
jarwyg
111 × 109.8 mm38 parts2LMIT0Shield
aryakaithal8
53.1 × 100.5 mm27 parts2LNo license0Tarea 1 Modulo NRF24L01
YunelySR
16.1 × 20.4 mm21 parts2LNo license0
How designs wire the NRF24L01
Read from the KiCad layouts of 33 open source designs, one per repository: what each pin of the NRF24L01 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pins have a decoupling capacitor on 15 of 33 designs, most often 10 nF (then 1 nF).
- The XC1 pin has a capacitor to GND on 15 of 16 designs, most often 22 pF (then 33 pF).
- The DVDD pin has a capacitor to GND on 15 of 16 designs, most often 33 nF (then 47 nF).
- The XC2 pin has a series resistor on 14 of 16 designs, most often 1 MΩ (then 10 MΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 7, 15, 18 | Connected to: 3.3V 69% · a signal 31% |
|
| VSSpin 8, 14, 17, 20 | Connected to: GND 79% · a signal 19% | — |
| XC2pin 9 | Connected to: Signal 88% |
|
| XC1pin 10 | Connected to: Signal 94% |
|
| VDD_PApin 11 | Connected to: Signal 75% · VDD_PA 19% |
|
| ANT1pin 12 | Connected to: Signal 94% |
|
| ANT2pin 13 | Connected to: Signal 94% |
|
| IREFpin 16 | Connected to: Signal 94% |
|
| DVDDpin 19 | Connected to: Signal 94% |
|
| VSS_21pin 21 | Connected to: Not connected 82% · GND 18% | — |
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Parthiv pcb v2 by dddrrreee, Cs240lx-24spr by dddrrreee, MySensorsNode by fallberg and SensebenderGW by mysensors.
The NRF24L01 in open source designs
The gallery holds 41 open source boards using the NRF24L01 from 33 GitHub repositories; a typical one measures about 50 × 49.9 mm and carries around 38 components.
93% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is Parthiv pcb v2 by dddrrreee.
Parts used alongside the NRF24L01
Microcontrollers on boards using the NRF24L01
What boards using the NRF24L01 are built for
NRF24L01: common questions
Where can I find a NRF24L01 reference design?
Each of the 41 boards on this page is a real design using the NRF24L01. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the NRF24L01 VDD pin?
The VDD pins have a decoupling capacitor on 15 of 33 designs, most often 10 nF (then 1 nF). Counted from the KiCad layouts of 33 open source designs using the NRF24L01.
How is the NRF24L01 XC1 pin connected?
The XC1 pin has a capacitor to GND on 15 of 16 designs, most often 22 pF (then 33 pF). Counted from the KiCad layouts of 33 open source designs using the NRF24L01.
How is the NRF24L01 DVDD pin connected?
The DVDD pin has a capacitor to GND on 15 of 16 designs, most often 33 nF (then 47 nF). Counted from the KiCad layouts of 33 open source designs using the NRF24L01.
What parts are used alongside the NRF24L01?
The ATSHA204A, CP2102N-Axx-xQFN20, AMS1117-3.3, RFM69HW and ArduinoProMini appear in the most repositories here.
Which microcontrollers do boards using the NRF24L01 use?
Most are built on AVR/Arduino (16), STM32 (6), Raspberry Pi (4) and ESP32 (2).
How big is a typical board using the NRF24L01?
The median is 50 × 49.9 mm, and 93% are two-layer designs.
What is the most popular open source board using the NRF24L01?
By GitHub stars, Parthiv pcb v2 by dddrrreee, with 13 stars.
Can I simulate one of these boards using the NRF24L01 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.