Array
andy666chang·DAPLink·hardware/array/array.kicad_pcb
About the Array PCB
Array is an open source STM32 PCB design by andy666chang, published on GitHub. It is a 2-layer board measuring 50 × 60 mm, with 175 components from 37 distinct parts.
Its main chip is the STM32F103CBTX, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 75 resistors, 45 capacitors, 20 connectors, 15 diodes, 10 ICs and 5 crystals.
Main components on the Array
Array bill of materials (BOM)
175 components, 37 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | STM32F103CBTX STM32F103CBTx | LQFP-48_7x7mm_P0.5mm | U2 |
| 4 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3, U5, U7, U9 |
| 4 | STM32F103CBTx | LQFP-48_7x7mm_P0.5mm | U4, U6, U8, U10 |
| 1 | 8MHZ 8MHz | Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 4 | 8MHz | Crystal_SMD_5032-2Pin_5.0x3.2mm | Y2, Y3, Y4, Y5 |
| 1 | CONN_01X04 Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 2 | CONN_01X05 Conn_01x05 | Harwin_M20-89005xx_1x05_P2.54mm_Horizontal | J2, J3 |
| 4 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J4, J7, J10, J13 |
| 8 | Conn_01x05 | Harwin_M20-89005xx_1x05_P2.54mm_Horizontal | J5, J6, J8, J9, J11, J12, J14, J15 |
| 1 | USB_C_RECEPTACLE_USB2.0 USB_C_Receptacle_USB2.0 | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | P1 |
| 4 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | P2, P3, P4, P5 |
| 5 | RST | SW_Push_SPST_NO_Alps_SKRK | RST1, RST2, RST3, RST4, RST5 |
| 5 | LEDG | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D4, D7, D10, D13 |
| 5 | LEDB | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D5, D8, D11, D14 |
| 5 | LEDR | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3, D6, D9, D12, D15 |
| 3 | 10NF 10nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C4, C8 |
| 2 | 10UF 10uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3 |
| 2 | 20PF 20pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C6 |
| 2 | 18PF 18pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C9 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 12 | 10nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C13, C17, C19, C22, C26, C28, C31 +4 |
| 8 | 10uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11, C12, C20, C21, C29, C30, C38, C39 |
| 8 | 20pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14, C15, C23, C24, C32, C33, C41, C42 |
| 8 | 18pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C16, C18, C25, C27, C34, C36, C43, C45 |
| 2 | 5K1 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R14 |
| 4 | 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R4, R11 |
| 1 | 100 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 3 | 1K5 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7, R15 |
| 1 | 470 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 2 | 4K7 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10 |
| 10 | 33 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R13, R27, R28, R42, R43, R57, R58 +2 |
| 8 | 5K1 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16, R29, R31, R44, R46, R59, R61, R74 |
| 16 | 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17, R18, R19, R26, R32, R33, R34, R41 +8 |
| 4 | 100 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20, R35, R50, R65 |
| 12 | 1K5 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21, R22, R30, R36, R37, R45, R51, R52 +4 |
| 4 | 470 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23, R38, R53, R68 |
| 8 | 4K7 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R24, R25, R39, R40, R54, R55, R69, R70 |
Array design files
The KiCad project lives in the andy666chang/DAPLink repository on GitHub; these links point at the commit this page was built from.
Array: common questions
What microcontroller does the Array use?
The Array is built around the STM32F103CBTX, from the STM32 family.
How big is the Array PCB?
The Array measures 50 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Array?
175 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Array design files?
From the andy666chang/DAPLink repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Array design in my own project?
The repository has no license, so all rights stay with andy666chang. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Array without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in DAPLink
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k