My-MicroPad
ankitanandchoudhary2006-eng·My-MicroPad·PCB/macropad.kicad_pcb
About the My-MicroPad PCB
My-MicroPad is an open source AVR/Arduino PCB design by ankitanandchoudhary2006-eng, published on GitHub. It is a 2-layer board measuring 134.1 × 80.3 mm, with 19 components from 3 distinct parts.
Its main chip is the Arduino_Pro_Micro, from the AVR/Arduino family. By type, the board carries 9 switches, 9 diodes and 1 IC.
It belongs with the keyboards designs in this gallery.
From the project
I made a 3X3 based 9 switch Micropad for myself . It is based on Arduino Pro Micro and has diodes to prevention ghosting . I made thePCB on Kicad and the 3D CAD on fuion 360.
Main components on the My-MicroPad
My-MicroPad bill of materials (BOM)
19 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Arduino_Pro_Micro | Arduino_Pro_Micro | U1 |
| 9 | ~ | MX_PCB_1.00u | S1, S2, S3, S4, S5, S6, S7, S8 +1 |
| 9 | ~ | Diode_DO-35 | D1, D2, D3, D4, D5, D6, D7, D8 +1 |
My-MicroPad design files
The KiCad project lives in the ankitanandchoudhary2006-eng/My-MicroPad repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/macropad.kicad_pcb
- SchematicPCB/macropad.kicad_sch
My-MicroPad: common questions
What microcontroller does the My-MicroPad use?
The My-MicroPad is built around the Arduino_Pro_Micro, from the AVR/Arduino family.
How big is the My-MicroPad PCB?
The My-MicroPad measures 134.1 × 80.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the My-MicroPad?
19 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the My-MicroPad design files?
From the ankitanandchoudhary2006-eng/My-MicroPad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the My-MicroPad design in my own project?
The repository has no license, so all rights stay with ankitanandchoudhary2006-eng. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the My-MicroPad without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k