36 open source boards using the Arduino_Pro_Micro

Real designs built with the Arduino_Pro_Micro, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

36 boardsClear filters|Most starred

How designs wire the Arduino_Pro_Micro

Read from the KiCad layouts of 30 open source designs, one per repository: what each pin of the Arduino_Pro_Micro connects to, and the resistors, capacitors and other passives placed on it.

  • The RAW pin is left unconnected on 83% of them (a signal on 4).
  • The RX1/PD2 pin is left unconnected on 18 of 29 designs (a signal on 11).
RX1/PD2pin 2Connected to: Not connected 62% · a signal 38%
GNDpin 3, 4, 23Connected to: GND 70% · not connected 20%
VCCpin 21Connected to: VCC 60% · a signal 27%
RAWpin 24Connected to: Not connected 83%

18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Atreus62 by profet23, Prusa chain production by d-weber, For science by peej and MidiMood by silveirago.

The Arduino_Pro_Micro in open source designs

The gallery holds 36 open source boards using the Arduino_Pro_Micro from 31 GitHub repositories; a typical one measures about 99.7 × 80.3 mm and carries around 47 components.

100% are two-layer designs, the rest use four layers or more, and 39% carry an open source license.

The most starred is Atreus62 by profet23.

Parts used alongside the Arduino_Pro_Micro

Microcontrollers on boards using the Arduino_Pro_Micro

Arduino_Pro_Micro: common questions

Where can I find a Arduino_Pro_Micro reference design?

Each of the 36 boards on this page is a real design using the Arduino_Pro_Micro. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the Arduino_Pro_Micro RAW pin connected?

The RAW pin is left unconnected on 83% of them (a signal on 4). Counted from the KiCad layouts of 30 open source designs using the Arduino_Pro_Micro.

How is the Arduino_Pro_Micro RX1/PD2 pin connected?

The RX1/PD2 pin is left unconnected on 18 of 29 designs (a signal on 11). Counted from the KiCad layouts of 30 open source designs using the Arduino_Pro_Micro.

Which microcontrollers do boards using the Arduino_Pro_Micro use?

Most are built on AVR/Arduino (36).

How big is a typical board using the Arduino_Pro_Micro?

The median is 99.7 × 80.3 mm, and 100% are two-layer designs.

What is the most popular open source board using the Arduino_Pro_Micro?

By GitHub stars, Atreus62 by profet23, with 240 stars.

Can I simulate one of these boards using the Arduino_Pro_Micro before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part