Encoder+Hall Breakout
About the Encoder+Hall Breakout
Encoder+Hall Breakout is an open source PCB design by AnotherBuildCorner, published on GitHub. It is a 2-layer board measuring 26.4 × 29.3 mm, with 13 components from 11 distinct parts.
Other key parts include the AS5600L-ASOM and DRV5032FCDBZR. By type, the board carries 3 ICs, 2 capacitors, 2 resistors and 1 connector.
It belongs with the displays & leds, power & battery and keyboards designs in this gallery.
From the project
A programmable HID control interface that replaces discrete key presses with continuous rotary input, enabling precise, context-aware interaction for workflows like video editing and CAD.
A programmable HID control interface that replaces discrete key presses with continuous rotary input, enabling precise, context-aware interaction for workflows like video editing and CAD.
- 4-layer mixed-signal embedded system (98 × 65 mm) based on nRF52840 (BLE + USB HID) - RF-aware PCB layout with calculated 50Ω antenna trace on TG155 FR4 - Battery-powered architecture (LiPo + charger + protection + load switching) - Multi-bus I²C system separating OLED displays and encoders for signal integrity - Designed within JLCPCB DFM constraints (no blind vias, optimized BOM, 0402/0603 preference) -…
Main components on the Encoder+Hall Breakout
Encoder+Hall Breakout bill of materials (BOM)
13 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AS5600L-ASOM | AS5600L-ASOM_AMS | U1 |
| 2 | DRV5032FCDBZR | DRV5032-DBZ0003A-MFG | U2, U3 |
| 1 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J1-2 |
| 1 | Jumper_2_Open | SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | 3.3V1 |
| 1 | Jumper_2_Bridged | SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | 5V1 |
| 1 | JUMPER_2_OPEN Jumper_2_Open | SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | CCW1 |
| 1 | JUMPER_2_BRIDGED Jumper_2_Bridged | SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | CW1 |
| 1 | TestPoint | PinHeader_1x01_P1.00mm_Vertical | OUT1 |
| 1 | 100N 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 10U 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 2 | 4.7K 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
Encoder+Hall Breakout design files
The KiCad project lives in the AnotherBuildCorner/Hyper_Wheel repository on GitHub; these links point at the commit this page was built from.
Encoder+Hall Breakout: common questions
How big is the Encoder+Hall Breakout?
The Encoder+Hall Breakout measures 26.4 × 29.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Encoder+Hall Breakout?
13 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Encoder+Hall Breakout design files?
From the AnotherBuildCorner/Hyper_Wheel repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Encoder+Hall Breakout design in my own project?
The repository has no license, so all rights stay with AnotherBuildCorner. Use it as a reference, and ask the author before reusing the design.
More boards in Hyper_Wheel
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
LevelShifterBreakout
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
Protector
byrantech
32.2 × 15.4 mm6 parts2LMIT4.3k
Switch
18.5 × 11.1 mm5 parts2LMIT4.3k