ChargeBoardMaster
About the ChargeBoardMaster PCB
ChargeBoardMaster is an open source PCB design by Anteater-Electric-Racing, published on GitHub. It is a 2-layer board measuring 123 × 120.7 mm, with 36 components from 23 distinct parts.
By type, the board carries 10 resistors, 8 diodes, 7 connectors, 4 jumpers, 3 switches and 2 transistors.
ChargeBoardMaster bill of materials (BOM)
36 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | IRF9540NPBF PMOS IRF9540 | TO-220-3_Horizontal_TabDown | Q1, Q3 |
| 1 | DT15-12PA | 12P-DeutschDT | J1 |
| 1 | 0469990138 ESTOP | 2pMinifitJR | J2 |
| 1 | 0469990138 HVIL | 2pMinifitJR | J3 |
| 1 | 0469990138 to Lead Acid Batt | 2pMinifitJR | J4 |
| 1 | 0469990138 BatteryTender | 2pMinifitJR | J5 |
| 1 | 0469990138 J1772 | 2pMinifitJR | J7 |
| 1 | 874271042 | 10pMinifit | J8 |
| 1 | Valeo CP | C_0805_2012Metric | JP1 |
| 1 | Orion CP | C_0805_2012Metric | JP2 |
| 1 | Valeo CC | C_0805_2012Metric | JP3 |
| 1 | Orion CC | C_0805_2012Metric | JP4 |
| 2 | G6B-2214P-US DC12 | RELAY_G6B-2114P-US_OMR | K1, K2 |
| 1 | ST141D00 | 20ASwitch | S1 |
| 2 | SW_Push | SW_PUSH_6mm | SW2, SW3 |
| 1 | IMD_FAULT | LED_D5.0mm | D1 |
| 3 | SB560-3G | D_DO-201_P15.24mm_Horizontal | D2, D3, D8 |
| 3 | BMS_FAULT | LED_D5.0mm | D4, D5, D6 |
| 1 | SDC Return | LED_D5.0mm | D7 |
| 5 | MFR-25FTF52-560R 560 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R5, R6 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8, R11 |
| 1 | 120r | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9 |
| 2 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10, R12 |
ChargeBoardMaster design files
The KiCad project lives in the Anteater-Electric-Racing/electrical-pcbs repository on GitHub; these links point at the commit this page was built from.
ChargeBoardMaster: common questions
How big is the ChargeBoardMaster PCB?
The ChargeBoardMaster measures 123 × 120.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ChargeBoardMaster?
36 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the ChargeBoardMaster design files?
From the Anteater-Electric-Racing/electrical-pcbs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ChargeBoardMaster design in my own project?
The repository has no license, so all rights stay with Anteater-Electric-Racing. Use it as a reference, and ask the author before reusing the design.
More boards in electrical-pcbs
SafetyBoard
154 × 93.9 mm166 parts4LNo license0
NXPCcm
125 × 100 mm96 parts2LNo license0
Pcc v0.1
170.3 × 151.7 mm61 parts2LNo license0
PowerDistributionBoard
76.9 × 99.8 mm58 parts2LNo license0
BSPD
90 × 70 mm54 parts2LNo license0
RTM
71 × 54.8 mm41 parts2LNo license0
LATCH
105.8 × 80.8 mm35 parts2LNo license0
TSSI
40 × 39.5 mm22 parts2LNo license0
Hi board bbc1
47.8 × 50.3 mm15 parts2LNo license0