Antons-USB-splitter-3.0
anton2785-bit·Antons-USB-splitter-3.0·PCB/USB hub.kicad_pcb
About the Antons-USB-splitter-3.0 PCB
Antons-USB-splitter-3.0 is an open source PCB design by anton2785-bit, published on GitHub. It is a 2-layer board measuring 84.8 × 50.3 mm, with 49 components from 12 distinct parts.
Other key parts include the TUSB8041RGCR. By type, the board carries 21 capacitors, 17 resistors, 5 connectors, 4 fuses, 1 IC and 1 crystal.
It belongs with the usb & debug tools designs in this gallery.
From the project
1 USB in 4 USB out
* This is a small PCB that can take 1 input signal via USB A and output 4 separate USB A signals. --- ## Why i made this project
I made the USB splitter because I want to have a USB hub closer to my keyboard or me in general so that I dont have to dive behind my PC to plug a USB. --- ## Images This is an image of the schematic: This is the PCB: The 3D model of the PCB: *
Main components on the Antons-USB-splitter-3.0
Antons-USB-splitter-3.0 bill of materials (BOM)
49 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TUSB8041RGCR | QFN50P900X900X100-65N | U1 |
| 1 | TSX-3225_24.0000MF18X-C | Crystal_SMD_SeikoEpson_TSX3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 5 | USB3_A | CONN_1932258-1 | J1, J2, J3, J4, J5 |
| 4 | Fuse | L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | F1, F2, F3, F4 |
| 16 | 100 nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 +8 |
| 1 | 1 uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16 |
| 2 | 10 uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17, C18 |
| 2 | 33 pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C25, C26 |
| 14 | 10kO | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7, R8, R9, R10, R11, R12, R13 +6 |
| 1 | 1MO | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
| 1 | 90.9kO | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16 |
| 1 | 9.53kO | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19 |
Antons-USB-splitter-3.0 design files
The KiCad project lives in the anton2785-bit/Antons-USB-splitter-3.0 repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/USB hub.kicad_pcb
- SchematicPCB/USB hub.kicad_sch
Antons-USB-splitter-3.0: common questions
How big is the Antons-USB-splitter-3.0 PCB?
The Antons-USB-splitter-3.0 measures 84.8 × 50.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Antons-USB-splitter-3.0?
49 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Antons-USB-splitter-3.0 design files?
From the anton2785-bit/Antons-USB-splitter-3.0 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Antons-USB-splitter-3.0 design in my own project?
The repository has no license, so all rights stay with anton2785-bit. Use it as a reference, and ask the author before reusing the design.
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389