HardLabs

StickMk2-connectors

AntonKrug·stick-business-card-mk2-blinky·KiCAD/stickMk2-connectors/stickMk2-connectors.kicad_pcb

StickMk2-connectors PCB layout, top view — open source board by AntonKrug

About the StickMk2-connectors PCB

StickMk2-connectors is an open source PCB design by AntonKrug, published on GitHub. It is a 2-layer board, with 2 components from 1 distinct parts.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Documentation of how my business card can be turned into a dev kit

I made unique business cards for myself, they are just narrow "sticks" which fit into a USB connector directly. The simplest variants can just have an ATMEGA88 chip with LED to perform 'morse code' and other types of blinkies:

However, there are more populated variants that can have their own dedicated ISP connector (1.27mm pin pitch) and with few more passives have software implemented USB HID capabilities:

StickMk2-connectors, from the project README
From the project README

StickMk2-connectors bill of materials (BOM)

2 components, 1 distinct parts.

QtyPartRefs
2
Conn_01x08_Female
J1, J2

StickMk2-connectors design files

The KiCad project lives in the AntonKrug/stick-business-card-mk2-blinky repository on GitHub; these links point at the commit this page was built from.

StickMk2-connectors: common questions

How big is the StickMk2-connectors PCB?

The StickMk2-connectors has 2 copper layers and is 1.6 mm thick.

How many components are on the StickMk2-connectors?

2 components, from 1 distinct parts. The full bill of materials is listed on this page.

Where can I download the StickMk2-connectors design files?

From the AntonKrug/stick-business-card-mk2-blinky repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the StickMk2-connectors design in my own project?

The repository has no license, so all rights stay with AntonKrug. Use it as a reference, and ask the author before reusing the design.

Similar boards