HardLabs

Stm32 nucleo-64 proto shield

AnttiNykanen·stm32_nucleo-64_proto_shield·kicad/nucleo_pb.kicad_pcb

Stm32 nucleo-64 proto shield layout, top view — open source board by AnttiNykanen

About the Stm32 nucleo-64 proto shield

Stm32 nucleo-64 proto shield is an open source PCB design by AnttiNykanen, published on GitHub. It is a 2-layer board measuring 91.4 × 91.4 mm, with 82 components from 6 distinct parts.

Other key parts include the TSSOP28_BREAKOUT. By type, the board carries 79 connectors and 1 IC.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

STM32 Nucleo-64 Prototyping Shield

This is a prototyping shield for ST's Nucleo-64 boards. It has the following features:

Labeled breakout pins for the Morpho connectors. Differences between the various Nucleo boards are documented in doc/morphodifferences.xlsx 1.27mm pitch (SOIC) SMD area with two through-hole pads per SMD pad Two separate TSSOP28 (0.65mm) breakout areas (one through-hole pad per SMD pad) * Rest of the available space is filled with through-hole prototyping area

Main components on the Stm32 nucleo-64 proto shield

TSSOP28_BREAKOUT

Stm32 nucleo-64 proto shield bill of materials (BOM)

82 components, 6 distinct parts.

QtyPartRefs
1
TSSOP28_BREAKOUT
U1
2
2X19_HEADER
CN7, CN10
76
CONN_2
P1, P2, P3, P4, P5, P6, P7, P8 +68
1
SOIC_AREA
P77
1
P***
1PIN
1
VAL**
PROTO_1PIN

Stm32 nucleo-64 proto shield design files

The KiCad project lives in the AnttiNykanen/stm32_nucleo-64_proto_shield repository on GitHub; these links point at the commit this page was built from.

Stm32 nucleo-64 proto shield: common questions

How big is the Stm32 nucleo-64 proto shield?

The Stm32 nucleo-64 proto shield measures 91.4 × 91.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Stm32 nucleo-64 proto shield?

82 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Stm32 nucleo-64 proto shield design files?

From the AnttiNykanen/stm32_nucleo-64_proto_shield repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Stm32 nucleo-64 proto shield design in my own project?

The repository has no license, so all rights stay with AnttiNykanen. Use it as a reference, and ask the author before reusing the design.

Similar boards