PARENT PWR
AquaBeacon·hardware·pcb/PARENT_PWR/PARENT_PWR.kicad_pcb
About the PARENT PWR PCB
PARENT PWR is an open source PCB design by AquaBeacon, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 100 × 84 mm, with 13 components from 9 distinct parts.
By type, the board carries 1 transistor, 1 fuse, 1 LED and 1 diode.
From the project
回路図・PCB・製造ツール
LTspiceで検証済みの4回路(LTspice/ sim/notes.md 参照)をKiCadの回路図+PCBに実装したもの。 すべて ERC合格・意図ネットリスト照合合格・DRC 0違反/未配線0。
各フォルダの内容: .kicadsch / .kicadpcb / .kicadpro、schematic.pdf、 render.png(3Dレンダ)、gerbers/(ガーバー+ドリル)、erc.rpt / drc.rpt、.net、 bom.csv(部品表: Value/Footprintでグループ化)。 datasheets/` に発注前確認で参照した一次資料(2SK4017東芝純正データシート)を同梱。
発注・組立時は ORDERING.md(4基板統合発注リスト+代替品情報)と BRINGUP.md(組立順序・通電手順・シミュ由来の期待測定値)を参照。 全体システム(Pico/SPRESENSE/テザー)への組み込みは SYSTEMINTEGRATION.md** (設計書とのギャップ分析・J2↔GPIO対応表)を参照。
PARENT PWR bill of materials (BOM)
13 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2SJ349 | TO-220-3_Vertical | Q1 |
| 1 | 10u | CP_Radial_D5.0mm_P2.50mm | C_3S1 |
| 3 | 100n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C_3S2, C_5C2, C_5L2 |
| 3 | 10u/25V | C_Disc_D5.0mm_W2.5mm_P5.00mm | C_5C1, C_5L1, C_BK1 |
| 1 | 3A F速断 | Fuseholder_Clip-5x20mm_Keystone_3517_Inline_P23.11x6.76mm_D1.70mm_Horizontal | F1 |
| 1 | I2C_PMAIN | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J_I2C |
| 1 | NJU7223F33 | TO-220-3_Vertical | REG3S |
| 1 | PWR | LED_D3.0mm | LED1 |
| 1 | SMBJ15A | D_SMB | D1 |
PARENT PWR design files
The KiCad project lives in the AquaBeacon/hardware repository on GitHub; these links point at the commit this page was built from.
PARENT PWR: common questions
How big is the PARENT PWR PCB?
The PARENT PWR measures 100 × 84 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PARENT PWR?
13 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PARENT PWR design files?
From the AquaBeacon/hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PARENT PWR design in my own project?
Yes, under the terms of its Apache-2.0 license, which AquaBeacon chose for the repository.
More boards in hardware
RX advanced mini
AquaBeacon
60 × 36 mm45 parts2LApache-2.00RX advanced
AquaBeacon
140 × 80 mm43 parts2LApache-2.00RX improved mini
AquaBeacon
68 × 46 mm41 parts2LApache-2.00RX improved
AquaBeacon
130 × 80 mm39 parts2LApache-2.00TX advanced
AquaBeacon
85 × 60 mm28 parts2LApache-2.00RP2040/RP2350
PARENT MAIN
AquaBeacon
112 × 88 mm24 parts2LApache-2.00TX improved
AquaBeacon
74 × 50 mm24 parts2LApache-2.00RP2040/RP2350
CHILD MAIN
AquaBeacon
104 × 88 mm22 parts2LApache-2.00CHILD PWR
AquaBeacon
62 × 70 mm15 parts2LApache-2.00Testgen
AquaBeacon
55 × 50 mm6 parts2LApache-2.00