Keyboard addon

aramcon-badge·keyboard-addon·pcb/q10keyboard-addon.kicad_pcb

Keyboard addon PCB layout, top view — open source STM32 board by aramcon-badge

About the Keyboard addon PCB

Keyboard addon is an open source STM32 PCB design by aramcon-badge, published on GitHub. It is a 2-layer board measuring 65 × 63.5 mm, with 23 components from 14 distinct parts.

Its main chip is the STM32F030C8Tx, from the STM32 family. Other key parts include the BBQ10KBD and M24C02-WMN. By type, the board carries 8 capacitors, 5 resistors, 4 connectors, 3 ICs, 1 crystal and 1 diode.

It belongs with the keyboards designs in this gallery.

From the project

BB-Q10 Keyboard Shitty Add-On

Main components on the Keyboard addon

Keyboard addon bill of materials (BOM)

23 components, 14 distinct parts.

QtyPartRefs
1
BBQ10KBD
U1
1
STM32F030C8Tx
U2
1
M24C02-WMN
U3
1
Badgelife_sao_connector_v169bis
X1
1
Conn_02x04_Top_Bottom
J1
1
Conn_01x06_Female
J2
1
Conn_01x08_Female
J3
1
Conn_01x08_Female
J4
1
Val**
KBD1
1
LED
D1
3
4.7uF
C1, C3, C5
5
100nF
C2, C4, C6, C7, C8
4
10K
R1, R2, R4, R5
1
1K
R3

Keyboard addon design files

The KiCad project lives in the aramcon-badge/keyboard-addon repository on GitHub; these links point at the commit this page was built from.

Keyboard addon: common questions

What microcontroller does the Keyboard addon use?

The Keyboard addon is built around the STM32F030C8Tx, from the STM32 family.

How big is the Keyboard addon PCB?

The Keyboard addon measures 65 × 63.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Keyboard addon?

23 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the Keyboard addon design files?

From the aramcon-badge/keyboard-addon repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Keyboard addon design in my own project?

The repository has no license, so all rights stay with aramcon-badge. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Keyboard addon without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards