15 open source boards using the STM32F030C8TX
Real designs built with the STM32F030C8TX, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Battery-Powered-STM32-Board-With-USB
mohamedboubaker
50 × 50 mm48 parts2LMIT13STM32
KICAD-STM32-GPS-Tracker-Project
Saie12
43.5 × 58.5 mm55 parts4LNo license2STM32
Project-09
ampnics
42.5 × 58.5 mm51 parts4LNo license2STM32
Custom-STM32-PCB-With
mohamedboubaker
52 × 52 mm37 parts2LNo license2STM32
STM32 gps tracker
hammadurrehman2006
46 × 60.3 mm53 parts4LNo license1STM32
STM32 GPS Tracking Module
tejashviraj19
42.5 × 58.5 mm51 parts4LNo license1STM32
Hvac v2
candykingdom
125 × 93 mm154 parts2LNo license0STM32
Pd power supply
ziteh
100 × 50 mm89 parts2LCERN-OHL-P-2.00STM32
Fallout pcb badge
Keyaan-07
55 × 40 mm85 parts2LNo license0STM32
Picoballoon2020
kajusK
22.3 × 49.9 mm62 parts2LGPL-3.00STM32
GPS TRACKER
HarshaKaushalya
42.5 × 58.5 mm53 parts4LNo license0STM32
Custom-STM32
dhnz-2006
52 × 52 mm37 parts2LNo license0STM32
Keyboard addon
aramcon-badge
65 × 63.5 mm23 parts2LNo license0STM32
STM32 GPS TRACKER
Sirucha16
42.5 × 58.5 mm51 parts4LNo license0STM32
DefCon31 HeatIndex BadgeAddon
androda
39.1 × 90.6 mm19 parts2LCC-BY-NC-4.021
How designs wire the STM32F030C8TX
Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the STM32F030C8TX connects to, and the resistors, capacitors and other passives placed on it.
- The BOOT0 pin has a resistor to GND on 13 of 15 designs, most often 10 kΩ (then 43 kΩ).
- The VDD pins have a decoupling capacitor on 12 of 15 designs, most often 100 nF (then 4.7 µF).
- The PC13 pin is left unconnected on 14 of 15 designs.
- The NRST pin has a capacitor to GND on 11 of 15 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1, 24, 48 | Connected to: 3.3V 100% |
|
| PC13pin 2 | Connected to: Not connected 93% | — |
| PC15pin 4 | Connected to: Not connected 80% · a signal 20% | — |
| PF0pin 5 | Connected to: Signal 73% · not connected 27% |
|
| PF1pin 6 | Connected to: Signal 73% · not connected 27% |
|
| NRSTpin 7 | Connected to: A connector 80% |
|
| VSSApin 8 | Connected to: GND 100% | — |
| VDDApin 9 | Connected to: 3.3V 100% |
|
| PA0pin 10 | Connected to: Not connected 67% · a signal 27% | — |
| PA1pin 11 | Connected to: Not connected 73% · a signal 27% | — |
| PB0pin 18 | Connected to: Not connected 67% · a signal 33% | — |
| PB1pin 19 | Connected to: Not connected 67% · a signal 33% | — |
| PB2pin 20 | Connected to: Not connected 73% · a signal 27% | — |
| PB10pin 21 | Connected to: Not connected 67% · a signal 33% | — |
| PB11pin 22 | Connected to: Signal 93% |
|
| VSSpin 23, 47 | Connected to: GND 100% | — |
| PB12pin 25 | Connected to: Signal 73% · not connected 27% |
|
| PB13pin 26 | Connected to: Signal 73% · not connected 27% |
|
| PB14pin 27 | Connected to: Not connected 80% · a signal 20% | — |
| PB15pin 28 | Connected to: Not connected 73% · a signal 27% | — |
| PA8pin 29 | Connected to: Not connected 87% | — |
| PA11pin 32 | Connected to: Not connected 73% · a signal 27% | — |
| PA12pin 33 | Connected to: Not connected 80% · a signal 20% | — |
| PF6pin 35 | Connected to: Not connected 80% · a signal 20% | — |
| PA15pin 38 | Connected to: Not connected 87% | — |
| PB3pin 39 | Connected to: Not connected 87% | — |
| PB4pin 40 | Connected to: Not connected 80% · a signal 20% | — |
| PB5pin 41 | Connected to: Not connected 80% · a signal 20% | — |
| PB6pin 42 | Connected to: A connector 20% · not connected 47% |
|
| PB7pin 43 | Connected to: A connector 20% · not connected 47% |
|
| BOOT0pin 44 | Connected to: Signal 93% |
|
| PB8pin 45 | Connected to: Not connected 67% · a signal 33% | — |
13 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DefCon31 HeatIndex BadgeAddon by androda, Battery-Powered-STM32-Board-With-USB by mohamedboubaker, Project-09 by ampnics and Custom-STM32-PCB-With-KiCad by mohamedboubaker.
The STM32F030C8TX in open source designs
The gallery holds 15 open source boards using the STM32F030C8TX from 15 GitHub repositories; a typical one measures about 46 × 58.5 mm and carries around 51 components.
60% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is DefCon31 HeatIndex BadgeAddon by androda.
Parts used alongside the STM32F030C8TX
Microcontrollers on boards using the STM32F030C8TX
What boards using the STM32F030C8TX are built for
STM32F030C8TX: common questions
Where can I find a STM32F030C8TX reference design?
Each of the 15 boards on this page is a real design using the STM32F030C8TX. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the STM32F030C8TX BOOT0 pin?
The BOOT0 pin has a resistor to GND on 13 of 15 designs, most often 10 kΩ (then 43 kΩ). Counted from the KiCad layouts of 15 open source designs using the STM32F030C8TX.
What decoupling capacitors do designs use on the STM32F030C8TX VDD pin?
The VDD pins have a decoupling capacitor on 12 of 15 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 15 open source designs using the STM32F030C8TX.
How is the STM32F030C8TX PC13 pin connected?
The PC13 pin is left unconnected on 14 of 15 designs. Counted from the KiCad layouts of 15 open source designs using the STM32F030C8TX.
What parts are used alongside the STM32F030C8TX?
The TPS5430DDA, SIM808, SMF05CT1G, 8MHZ and 100N appear in the most repositories here.
Which microcontrollers do boards using the STM32F030C8TX use?
Most are built on STM32 (15).
How big is a typical board using the STM32F030C8TX?
The median is 46 × 58.5 mm, and 60% are two-layer designs.
What is the most popular open source board using the STM32F030C8TX?
By GitHub stars, DefCon31 HeatIndex BadgeAddon by androda, with 21 stars.
Can I simulate one of these boards using the STM32F030C8TX before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.