HardLabs

Breaz blinky

AravinthPanch·various-hardware-projects·embedded-training/breaz-blinky-pcb/breaz-blinky-pcb.kicad_pcb

Breaz blinky PCB layout, top view — open source AVR/Arduino board by AravinthPanch

About the Breaz blinky PCB

Breaz blinky is an open source AVR/Arduino PCB design by AravinthPanch, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 89.4 × 83 mm, with 4 components from 4 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. By type, the board carries 1 module, 1 connector, 1 switch and 1 resistor.

It belongs with the iot & wireless designs in this gallery.

From the project

Collection of various PCB designs and Firmware for prototyping projects

Main components on the Breaz blinky

Arduino_Nano_v3.x

Breaz blinky bill of materials (BOM)

4 components, 4 distinct parts.

QtyPartRefs
1
Arduino_Nano_v3.x
A1
1
ssd1306-oled
J1
1
button
SW1
1
10K
R1

Breaz blinky design files

The KiCad project lives in the AravinthPanch/various-hardware-projects repository on GitHub; these links point at the commit this page was built from.

Breaz blinky: common questions

What microcontroller does the Breaz blinky use?

The Breaz blinky is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the Breaz blinky PCB?

The Breaz blinky measures 89.4 × 83 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Breaz blinky?

4 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Breaz blinky design files?

From the AravinthPanch/various-hardware-projects repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Breaz blinky design in my own project?

Yes, under the terms of its Apache-2.0 license, which AravinthPanch chose for the repository.

Can I test firmware for the Breaz blinky without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in various-hardware-projects

Similar boards