LPKF Test
About the LPKF Test PCB
LPKF Test is an open source AVR/Arduino PCB design by AravinthPanch, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 30.5 × 30.5 mm, with 7 components from 4 distinct parts.
Its main chip is the ATMEGA168PA-AU, from the AVR/Arduino family. By type, the board carries 3 capacitors, 2 resistors, 1 IC and 1 connector.
It belongs with the iot & wireless designs in this gallery.
From the project
Collection of various PCB designs and Firmware for prototyping projects
Main components on the LPKF Test
LPKF Test bill of materials (BOM)
7 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATMEGA168PA-AU | TQFP-32_7x7mm_Pitch0.8mm | U1 |
| 1 | 02x04 | Pin_Header_Straight_2x04_Pitch2.54mm | J1 |
| 3 | 0.1uF | C_0603_HandSoldering | C1, C2, C3 |
| 2 | 10K | R_0603_HandSoldering | R1, R2 |
LPKF Test design files
The KiCad project lives in the AravinthPanch/various-hardware-projects repository on GitHub; these links point at the commit this page was built from.
LPKF Test: common questions
What microcontroller does the LPKF Test use?
The LPKF Test is built around the ATMEGA168PA-AU, from the AVR/Arduino family.
How big is the LPKF Test PCB?
The LPKF Test measures 30.5 × 30.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LPKF Test?
7 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the LPKF Test design files?
From the AravinthPanch/various-hardware-projects repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the LPKF Test design in my own project?
Yes, under the terms of its Apache-2.0 license, which AravinthPanch chose for the repository.
Can I test firmware for the LPKF Test without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in various-hardware-projects
16-led board
86.4 × 49.5 mm36 parts2LApache-2.016
AVR/ArduinoAraBase atmega2560
100 × 100 mm21 parts2LApache-2.016
AVR/ArduinoAtmega2560-baseboard
55.8 × 39.8 mm18 parts2LApache-2.016
7-segment brd
59.7 × 45.7 mm11 parts2LApache-2.016
Designed by Aravinth
38 × 36.2 mm9 parts2LApache-2.016
Blinky
36.8 × 49.5 mm7 parts2LApache-2.016
LPKF Test Min
27.9 × 21.6 mm6 parts2LApache-2.016
AVR/ArduinoBreaz blinky
89.4 × 83 mm4 parts2LApache-2.016
NRF24 Breakout
31.8 × 30.5 mm3 parts2LApache-2.016
Similar boards
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k
AVR/ArduinoMegadesk
gcormier
41.7 × 32.2 mm23 parts2LGPL-3.0818
AVR/ArduinoEasyduino Atmega Nano
Hanqaqa
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746