JumperLUX

Architeuthis-Flux·JumperLUX·JumperLUX/JumperLUX.kicad_pcb

JumperLUX PCB layout, top view — open source board by Architeuthis-Flux

About the JumperLUX PCB

JumperLUX is an open source PCB design by Architeuthis-Flux, published on GitHub under the CC0-1.0 license. It is a 4-layer board measuring 82.6 × 112.4 mm, with 117 components from 21 distinct parts.

By type, the board carries 80 diodes, 18 connectors, 17 test points and 2 jumpers.

It belongs with the dev boards & breakouts and displays & leds designs in this gallery.

From the project

A breadboard wired to a protoboard wired to a bunch of SMD footprints. Literally Hackable (with a hacksaw)

A breadboard wired to a protoboard wired to a bunch of SMD footprints. Literally Hackable (with a hacksaw)

This should be everything you need to make these yourself, along with my other repositories for the clips and board shells.

Or you can buy these from me on Tindie or Elecrow

Note that there's no built-in microcontroller to drive the LEDs, but it's trivial to solder any microcontroller you like onto the SMD breakout and run a jumper to the LED data in and use the Adafruit Neopixel library to control them. If you have a Raspberry Pi Pico, you can use the Jumperless firmware and the…

JumperLUX bill of materials (BOM)

117 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
CONN_01X30_SOCKET
Conn_01x30_Socket
J1, J10
6
CONN_01X30_SOCKET
Conn_01x30_Socket
J2, J3, J4, J7, J8, J9
2
CONN_01X30_SOCKET
Conn_01x30_Socket
J5, J6
1
Connector_Breadboard
J11
1
CONN_02X32_TOP_BOTTOM
Conn_02x32_Top_Bottom
J12
1
CONN_02X32_TOP_BOTTOM
Conn_02x32_Top_Bottom
J13
1
CONN_02X32_TOP_BOTTOM
Conn_02x32_Top_Bottom
J14
1
CONN_02X30_TOP_BOTTOM
Conn_02x30_Top_Bottom
J15
1
CONN_02X32_TOP_BOTTOM
Conn_02x32_Top_Bottom
J16
2
CONN_01X30_SOCKET
Conn_01x30_Socket
J17, J18
1
POS_TOP_BOTTOM
JP1
1
NEG_TOP_BOTTOM
JP2
1
LED DOUT
TP15
2
LED DIN
TP16, TP17
3
LED 5V
TP18, TP21, TP22
3
LED GND
TP19, TP20, TP23
2
TOP_POS_RAIL
TP24, TP25
2
TOP_NEG_RAIL
TP26, TP27
2
BOTTOM_POS_RAIL
TP28, TP29
2
BOTTOM_NEG_RAIL
TP30, TP31
Show 1 more
QtyPartRefs
80
WS2812B
D1, D2, D3, D4, D5, D6, D7, D8 +72

JumperLUX design files

The KiCad project lives in the Architeuthis-Flux/JumperLUX repository on GitHub; these links point at the commit this page was built from.

JumperLUX: common questions

How big is the JumperLUX PCB?

The JumperLUX measures 82.6 × 112.4 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the JumperLUX?

117 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the JumperLUX design files?

From the Architeuthis-Flux/JumperLUX repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the JumperLUX design in my own project?

Yes, under the terms of its CC0-1.0 license, which Architeuthis-Flux chose for the repository.

Similar boards