Display board

arcticlula·Netscore·hardware/pcb/v3.0/display-board-big/display-board.kicad_pcb

Display board layout, top view — open source board by arcticlula

About the Display board

Display board is an open source PCB design by arcticlula, published on GitHub under the MIT license. It is a 4-layer board measuring 102 × 40 mm, with 52 components from 18 distinct parts.

Other key parts include the TLC5951RHA, BH1750FVI, 0.8in SMD, GS-S2011AB and FPC-30P-0.5MM. By type, the board carries 16 diodes, 12 ICs, 11 resistors, 7 capacitors, 4 transistors and 1 module.

It belongs with the displays & leds and robotics & motion designs in this gallery.

From the project

Device that keeps track of a volleyball's game score (points and sets). Ideally it should be mounted on the net, since it has a display on the front and back and buttons on the sides.

Scoreboard system built around an ESP32-S3 main board with two hot-pluggable display slots and per-slot piezo audio.

Reference design deep-dive for the audio section: drv8662-buzzer-driver.md (design equations, BOM rationale, sigma-delta notes).

- [x] Buzzer nets — fixed in v3.0: BUZZER+/BUZZER- from the DRV8662 now reach both buzzer connectors (netlist-verified). - [ ] R21 (DRV8662 REXT) is 9.3 kΩ — non-stock value, use 9.31 kΩ or 10 kΩ. - [x] 0.8" score digit pinout — fixed in v3.0: the four 0.8" digits (U3/U5/U10/U12) use the dedicated 7Seg 0.8in Single symbol (correct pinout, Luis…

Main components on the Display board

TLC5951RHABH1750FVI0.8in SMDGS-S2011ABFPC-30P-0.5MM

Display board bill of materials (BOM)

52 components, 18 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TLC5951RHA
U1
1
BH1750FVI
BH1750FVI-TR
U2
4
0.8in SMD
U3, U5, U10, U12
6
GS-S2011AB
U4, U6, U7, U8, U9, U11
1
FPC-30P-0.5MM
FPC-30P-0.5mm
A1
4
AO6604
Q1, Q2, Q3, Q4
1
SIQ-02FVS3
SW1
8
LED
D1, D2, D3, D4, D11, D12, D13, D14
4
LED
D5, D6, D15, D16
4
BAR LED
D7, D8, D9, D10
4
0.1UF
0.1uF
C1, C2, C4, C6
1
10UF
10uF
C3
1
C_Polarized
C5
1
0.22UF
0.22uF
C7
1
651
R1
1
1k
R2
1
100K
100k
R3
8
10K
R4, R5, R6, R7, R8, R9, R10, R11

Display board design files

The KiCad project lives in the arcticlula/Netscore repository on GitHub; these links point at the commit this page was built from.

Display board: common questions

How big is the Display board?

The Display board measures 102 × 40 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Display board?

52 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Display board design files?

From the arcticlula/Netscore repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Display board design in my own project?

Yes, under the terms of its MIT license, which arcticlula chose for the repository.

More boards in Netscore

Similar boards