PSX-Breakout
About the PSX-Breakout
PSX-Breakout is an open source PCB design by arithmaldor, published on GitHub under the CERN-OHL-1.2 license. It is a 2-layer board measuring 100 × 44.9 mm, with 9 components from 8 distinct parts.
By type, the board carries 5 connectors, 3 capacitors and 1 switch.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Breaks out AV signals from a PSX connector.
This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.
You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions
PSX-Breakout bill of materials (BOM)
9 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x12_Male | PSX_AV | J1 |
| 1 | Mini-DIN-4 | CUI_MD-40SG | J2 |
| 1 | SJ1-3533NG AudioJack3 | CUI_SJ1-3533NG | J3 |
| 1 | ICD15S13E6GV00LF DB15_Female_HighDensity | VGA | J4 |
| 1 | RCA-628N1-14 3x2_RCA | 3x2_RCA | J5 |
| 1 | OS102011MA1QN1 SW_SPDT | C&K_SPDT | SW1 |
| 2 | UUD1H221MNL1GS CP1 | CP_Elec_10x10 | C2, C3 |
| 1 | CP1 | CP_Elec_10x10 | C4 |
PSX-Breakout design files
The KiCad project lives in the arithmaldor/PSX-Breakout repository on GitHub; these links point at the commit this page was built from.
- LayoutPSX Breakout.kicad_pcb
- BOMBOM.csv
PSX-Breakout: common questions
How big is the PSX-Breakout?
The PSX-Breakout measures 100 × 44.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PSX-Breakout?
9 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PSX-Breakout design files?
From the arithmaldor/PSX-Breakout repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the PSX-Breakout design in my own project?
Yes, under the terms of its CERN-OHL-1.2 license, which arithmaldor chose for the repository.
Similar boards
134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979