HardLabs

ModuleV440

Arkariusz·bms·ModuleV440/ModuleV440.kicad_pcb

ModuleV440 PCB layout, top view — open source AVR/Arduino board by Arkariusz

About the ModuleV440 PCB

ModuleV440 is an open source AVR/Arduino PCB design by Arkariusz, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 30 × 61.4 mm, with 42 components from 27 distinct parts.

Its main chip is the ATTINY841-SSU, from the AVR/Arduino family. Other key parts include the EL3H7(B)(TA)-G. By type, the board carries 23 resistors, 4 diodes, 4 capacitors, 1 IC, 1 transistor and 1 crystal.

It belongs with the power & battery designs in this gallery, and the repository also holds 1 earlier revision of it.

From the project

Do it yourself battery management system for Lithium ion battery packs/cells

Do it yourself battery management system for Lithium ion battery packs/cells

More discussion Open Energy Monitor Forum

If you are looking for version 3 (obsolete) of this project take a look here

THIS REPOSITORY CONTAINS THE HARDWARE FOR THE SYSTEM

If you find the BMS useful, please consider buying me a beer, check out Patron for more information

This repository contains the hardware designs, generally in KiCad format. Unless you are changing the design, you don't need to use/install KiCad, just use the premade files.

ModuleV440, from the project README
From the project README

Main components on the ModuleV440

EL3H7(B)(TA)-G

ModuleV440 bill of materials (BOM)

42 components, 27 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
EL3H7(B)(TA)-G
U1
1
AO3400A
Q1
1
8MHZ Ceramic Resonator
Y1
1
AVR-ISP-6
J2
1
ATTINY841-SSU
ATtiny841-SSU
ATTINY841
1
Ext Temp Sensor
EXTTEMP1
1
MSMD150
mSMD150
F1
1
Battery
POWER1
1
Ext Temp Sensor
REMOTE1
1
RX Connector
RX1
1
TX Connector
TX1
1
AZ432ANTR-E1
D1
1
SMBJ5.0A
D2
1
Red
D3
1
Blue
D4
1
100NF
100nF
C1
1
1UF
1uF
C2
2
22PF
22pF
C4, C5
4
10KOHMS
R1, R15, R20, R21
1
1KOHMS
R2
Show 7 more
QtyPartRefs
1
6.8K
R3
1
2.7K
R4
1
220 OHMS
R5
9
3.3OHM 3/4W
R6, R8, R12, R22, R24, R25, R26, R29 +1
1
510OHMS
R14
3
2.2KOHMS
R16, R17, R18
2
CMFB103F3950FANT
R19, R23

ModuleV440 design files

The KiCad project lives in the Arkariusz/bms repository on GitHub; these links point at the commit this page was built from.

ModuleV440: common questions

What microcontroller does the ModuleV440 use?

The ModuleV440 is built around the ATTINY841-SSU, from the AVR/Arduino family.

How big is the ModuleV440 PCB?

The ModuleV440 measures 30 × 61.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ModuleV440?

42 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ModuleV440 design files?

From the Arkariusz/bms repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the ModuleV440 design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

Can I test firmware for the ModuleV440 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in bms

Earlier revisions in the repo: ModuleV421

Similar boards