HardLabs

Led test

arlaptiev·erhythms·pcb/led_test/led_test.kicad_pcb

Led test PCB layout, top view — open source Raspberry Pi board by arlaptiev

About the Led test PCB

Led test is an open source Raspberry Pi PCB design by arlaptiev, published on GitHub. It is a 2-layer board measuring 47.6 × 31.7 mm, with 4 components from 2 distinct parts.

Its main chip is the Module_RaspberryPi_PicoW_Combined, from the Raspberry Pi family. By type, the board carries 3 diodes and 1 module.

Led test bill of materials (BOM)

4 components, 2 distinct parts.

QtyPartRefs
1
Module_RaspberryPi_PicoW_Combined
M1
3
1655
D1, D2, D3

Led test design files

The KiCad project lives in the arlaptiev/erhythms repository on GitHub; these links point at the commit this page was built from.

Led test: common questions

What microcontroller does the Led test use?

The Led test is built around the Module_RaspberryPi_PicoW_Combined, from the Raspberry Pi family.

How big is the Led test PCB?

The Led test measures 47.6 × 31.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Led test?

4 components, from 2 distinct parts. The full bill of materials is listed on this page.

Where can I download the Led test design files?

From the arlaptiev/erhythms repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Led test design in my own project?

The repository has no license, so all rights stay with arlaptiev. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Led test without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

More boards in erhythms

Similar boards