Minesweeper2026
arminesweeper·Minesweeper2026·Minesweeper2026/Schematic/Robotics_Mine.kicad_pcb
About the Minesweeper2026 PCB
Minesweeper2026 is an open source PCB design by arminesweeper, published on GitHub. It is a 2-layer board measuring 92.6 × 60.4 mm, with 96 components from 52 distinct parts.
By type, the board carries 43 connectors, 25 resistors, 13 capacitors, 9 LEDs, 2 transistors and 2 relays.
It belongs with the robotics & motion designs in this gallery.
Minesweeper2026 bill of materials (BOM)
96 components, 52 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 2N2222A-TO92 | TO-92_Inline_Wide_EBC | Q1, Q2 |
| 5 | APRXMT | JST_S4B-XH-A | J1, J2, J3, J4, J5 |
| 1 | OI54321GV | JST_S8B-XH-A-1 | J6 |
| 1 | USB_A | USB_A_Connfly_DS1095 | J7 |
| 1 | MAG1 | TerminalBlock_OnShore_1x02_P5.00mm_Horizontal | J9 |
| 1 | MAG2 | TerminalBlock_OnShore_1x02_P5.00mm_Horizontal | J10 |
| 1 | MAG3 | TerminalBlock_OnShore_1x02_P5.00mm_Horizontal | J11 |
| 1 | MAG4 | TerminalBlock_OnShore_1x02_P5.00mm_Horizontal | J12 |
| 1 | SERVO | PinHeader_01x03_P2.54mm_Vertical_THT_D1.4mm | J13 |
| 1 | MGNT | PinHeader_01x01_P2.54mm_Vertical_THT_D1.4mm | J14 |
| 1 | SIRENS | PinHeader_01x01_P2.54mm_Vertical_THT_D1.4mm | J15 |
| 1 | ENC1 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J16 |
| 1 | ENC2 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J17 |
| 1 | SW | PinHeader_01x02_P2.54mm_Vertical_THT_D1.4mm | J18 |
| 1 | MSW | PinHeader_01x02_P2.54mm_Vertical_THT_D1.4mm | J19 |
| 1 | G PWM DIR | PinHeader_01x03_P2.54mm_Vertical_THT_D1.4mm | J20 |
| 1 | SIREN | TerminalBlock_OnShore_1x02_P5.00mm_Horizontal | J21 |
| 1 | 5V | TerminalBlock_OnShore_1x02_P5.00mm_Horizontal | J22 |
| 1 | 5V SERVO | TerminalBlock_OnShore_1x02_P5.00mm_Horizontal | J23 |
| 1 | 12V | TerminalBlock_OnShore_1x02_P5.00mm_Horizontal | J24 |
Show 32 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SERVO | PinHeader_01x01_P2.54mm_Vertical_THT_D1.4mm | J25 |
| 1 | MAG5 | TerminalBlock_OnShore_1x02_P5.00mm_Horizontal | J27 |
| 1 | LIFT | TerminalBlock_OnShore_1x02_P5.00mm_Horizontal | J28 |
| 2 | MPU6050 | PinHeader_01x08_P2.54mm_Vertical_THT_D1.4mm | J29, J38 |
| 1 | ENC1 | PinHeader_01x02_P2.54mm_Vertical_THT_D1.4mm | J30 |
| 1 | ENC2 | PinHeader_01x02_P2.54mm_Vertical_THT_D1.4mm | J31 |
| 1 | SUB | TerminalBlock_OnShore_1x02_P5.00mm_Horizontal | J32 |
| 1 | LM1 | PinHeader_01x01_P2.54mm_Vertical_THT_D1.4mm | J33 |
| 1 | LM2 | PinHeader_01x01_P2.54mm_Vertical_THT_D1.4mm | J34 |
| 1 | LIMIT2 | TerminalBlock_OnShore_1x02_P5.00mm_Horizontal | J35 |
| 1 | CYTRON | PinHeader_01x05_P2.54mm_Vertical_THT_D1mm | J36 |
| 1 | LIFT | PinHeader_01x02_P2.54mm_Vertical_THT_D1.4mm | J37 |
| 1 | VG12345MIO | JST_S8B-XH-A-1 | J39 |
| 1 | METAL DETECTOR | PinHeader_01x06_P2.54mm_Vertical_THT_D1.4mm | J40 |
| 1 | MD | PinHeader_01x02_P2.54mm_Vertical_THT_D1.4mm | J42 |
| 1 | LM2 LM1 PWM DIR G V | JST_S8B-XH-A-1 | J43 |
| 1 | L1 L2 D3 P3 G V | JST_S8B-XH-A-1 | J44 |
| 1 | LIMIT1 | TerminalBlock_OnShore_1x02_P5.00mm_Horizontal | J45 |
| 1 | 12V G | TerminalBlock_OnShore_1x02_P5.00mm_Horizontal | J46 |
| 1 | MAGNETS&LIFT | RELAY_SRD-12VDC-SL-C | K1 |
| 1 | SIRENCALL | RELAY_SRD-12VDC-SL-C | K2 |
| 9 | ~ | LED_D3.0mm | DL1, DL2, DL3, DL4, DL5, DL6, DL7, DL8 +1 |
| 2 | 1N4007 | D_DO-41_SOD81_P7.62mm_Horizontal | D1, D2 |
| 5 | 100:50 n | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C4, C6, C8, C10 |
| 1 | 470uF< | CP_Radial_D10.0mm_P5.00mm | C2 |
| 5 | 2000uF< | CP_Radial_D10.0mm_P5.00mm | C3, C9, C11, C12, C13 |
| 2 | 1000uF< | CP_Radial_D10.0mm_P5.00mm | C5, C7 |
| 11 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R4, R7, R10, R13, R16, R17, R18 +3 |
| 5 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R5, R8, R11, R14 |
| 5 | 3.9k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R6, R9, R12, R15 |
| 2 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R44, R47 |
| 2 | 3.9k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R45, R46 |
Minesweeper2026 design files
The KiCad project lives in the arminesweeper/Minesweeper2026 repository on GitHub; these links point at the commit this page was built from.
Minesweeper2026: common questions
How big is the Minesweeper2026 PCB?
The Minesweeper2026 measures 92.6 × 60.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Minesweeper2026?
96 components, from 52 distinct parts. The full bill of materials is listed on this page.
Where can I download the Minesweeper2026 design files?
From the arminesweeper/Minesweeper2026 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Minesweeper2026 design in my own project?
The repository has no license, so all rights stay with arminesweeper. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979