Bangladesh-Blinky-Board
ArnaanShah·Bangladesh-Blinky-Board·PCB/BangladeshBlinkyBoard.kicad_pcb
About the Bangladesh-Blinky-Board
Bangladesh-Blinky-Board is an open source PCB design by ArnaanShah, published on GitHub under the Unlicense license. It is a 2-layer board measuring 100 × 60 mm, with 18 components from 9 distinct parts.
Other key parts include the NE555P and 4017. By type, the board carries 10 diodes, 2 ICs, 2 capacitors, 2 resistors and 1 connector.
From the project
A Simple LED chaser in the shape of the flag of Bangladesh based on the Blinky Board tutorial from Stasis
1. Order your PCB from JLCPCB 2. Solder the components onto the board 3. Place the 3d printed circle on top of the LED ring 4. Power on your blinky board!
Main components on the Bangladesh-Blinky-Board
Bangladesh-Blinky-Board bill of materials (BOM)
18 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555P | DIP-8_W7.62mm | U1 |
| 1 | 4017 | N16 | U2 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | R_Potentiometer | Potentiometer_Vishay_T93YA_Vertical | RV1 |
| 10 | LED | LED_D3.0mm | D1, D2, D3, D4, D5, D6, D7, D8 +2 |
| 1 | 0.01 uF | C_Disc_D7.5mm_W2.5mm_P5.00mm | C1 |
| 1 | 1uF | CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 470 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
Bangladesh-Blinky-Board design files
The KiCad project lives in the ArnaanShah/Bangladesh-Blinky-Board repository on GitHub; these links point at the commit this page was built from.
Bangladesh-Blinky-Board: common questions
How big is the Bangladesh-Blinky-Board?
The Bangladesh-Blinky-Board measures 100 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Bangladesh-Blinky-Board?
18 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Bangladesh-Blinky-Board design files?
From the ArnaanShah/Bangladesh-Blinky-Board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Bangladesh-Blinky-Board design in my own project?
Yes, under the terms of its Unlicense license, which ArnaanShah chose for the repository.