Shori
ArnavMK·shori·Hardware/shori/shori.kicad_pcb
About the Shori PCB
Shori is an open source STM32 PCB design by ArnavMK, published on GitHub. It is a 4-layer board measuring 93 × 38.5 mm, with 46 components from 18 distinct parts.
Its main chip is the STM32F405RGT6, from the STM32 family. Other key parts include the AP2112K-3.3, PCM3060PWR and NE5532. By type, the board carries 29 capacitors, 9 resistors, 4 ICs, 2 inductors, 1 crystal and 1 diode.
It belongs with the audio designs in this gallery.
From the project
A digital FX processor made for Waveforge (a custom solid state guitar amplifier)
Shori is a custom digital fx processor pcb for electric guitars. This is the heart of the modular project i am building called Wave forge (a solid state guitar amplifier ) And this is the first revision of the board!
This project comprises of three different printed circuit boards 1. Main power amp, preamp and I/O board: Shoyu (To be started) 2. The Digital FX processor: Shori (Rev 1 finished) 3. The Screen controller board: Gamen (to be started)
Main components on the Shori
Shori bill of materials (BOM)
46 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F405RGT6 | QFP50P1200X1200X160-64N | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U2 |
| 1 | PCM3060PWR | SOP65P640X120-28N | U3 |
| 1 | NE5532 | SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | D_Schottky | D_SOD-123 | D1 |
| 2 | FerriteBead | L_0805_2012Metric | FB1, FB2 |
| 1 | 10μF | C_0805_2012Metric | C1 |
| 2 | 2.2uF | C_0805_2012Metric | C2, C11 |
| 5 | 10μF | C_1206_3216Metric | C3, C15, C17, C19, C22 |
| 11 | 100nF | C_0805_2012Metric | C4, C6, C7, C8, C9, C12, C16, C18 +3 |
| 3 | 1uF | C_0805_2012Metric | C5, C26, C27 |
| 2 | 10uF | C_1206_3216Metric | C10, C29 |
| 2 | 18pF | C_0805_2012Metric | C13, C14 |
| 2 | 4.7μF | C_0805_2012Metric | C21, C23 |
| 1 | 100pF | C_0805_2012Metric | C28 |
| 7 | 10K | R_0805_2012Metric | R1, R4, R5, R6, R7, R8, R9 |
| 2 | 2.2k | R_0805_2012Metric | R2, R3 |
Shori design files
The KiCad project lives in the ArnavMK/shori repository on GitHub; these links point at the commit this page was built from.
- LayoutHardware/shori/shori.kicad_pcb
- SchematicHardware/shori/shori.kicad_sch
Shori: common questions
What microcontroller does the Shori use?
The Shori is built around the STM32F405RGT6, from the STM32 family.
How big is the Shori PCB?
The Shori measures 93 × 38.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Shori?
46 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Shori design files?
From the ArnavMK/shori repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Shori design in my own project?
The repository has no license, so all rights stay with ArnavMK. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Shori without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k