109 open source boards using the STM32F405RGT6
Real designs built with the STM32F405RGT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Cheap-FOCer-2
shamansystems
59.1 × 99.9 mm165 partsNo license406STM32
LittleBrain-STM32F4-Sensorboard
pms67
55 × 55 mm82 parts4LNo license337STM32
STM32F4-Reference
pms67
56 × 51 mm46 parts4LMIT192STM32
FOC
nordstream3
75.2 × 99.5 mm238 parts4LNo license80STM32
BluePhil
pms67
50 × 66 mm99 parts2LMIT53STM32
Marbles v70
mort13
88.9 × 106.1 mm207 parts2LGPL-3.012STM32
UsbSound
SteveSyfuhs
121.6 × 79.8 mm91 parts4LMIT12STM32
OwmBoard
kanengomibako
55.4 × 66 mm158 parts2LUnlicense11STM32
QUarkNano 9250 UC4H
ukmook
21.5 × 30 mm61 parts4LCC-BY-SA-4.010STM32
SimpleFC G
wangyeee
42 × 50 mm130 parts4LBSD-3-Clause9STM32
STM32F405RGT6 STUnoPlus
r-pv
42.3 × 55.8 mm53 parts2LGPL-3.09- schematic only · 9 partsSTM32
MetaForge
FidelOdok
9 partsApache-2.08 STM32
Liv Synth
SloBloLabs
230 × 159.9 mm273 parts2LMIT7STM32
F8-fc h7 rev a
victorhook
35.5 × 35.5 mm105 parts4LNo license6STM32
EtherCATControllerHP
kscalelabs
77 × 77 mm168 parts6LNo license5ESP32
Micromouse
aiwachow
85 × 95 mm139 parts2LNo license5STM32
VideoFrame
ts-manuel
80 × 50 mm103 parts4LGPL-3.05STM32
IMpack
harrislab-brown
38 × 35.3 mm94 parts4LCC-BY-SA-4.04STM32
Stm32f4xx minimal dev
amrithHN
70.8 × 70.8 mm74 parts4LGPL-3.04STM32
FOC KING
b264
75.2 × 99.5 mm238 parts4LNo license3ESP32
Autonomous-Garden-Rover
houseofthe051010
108 × 168 mm217 parts4LMIT3STM32
Uwb beacon board
cvra
42 × 30 mm67 parts2LCustom license3STM32
STM32F405RGT6 breakout board
JordanAceto
50.8 × 83.8 mm38 parts2LCC-BY-4.03ESP32
Autonomous-Garden-Management-System
GuzziFlipFlops
108 × 168 mm217 parts4LMIT2STM32
Dual Slope Generator
JordanAceto
99.1 × 99.1 mm163 parts2LCC-BY-4.02STM32
Flight computer
cuspaceflight
80 × 80 mm114 parts4LNo license2STM32
Daedalus
0xJeremy
42 × 50.2 mm94 parts2LNo license2STM32
STM32F405RGT6-and-HDC1080-Development-Board
FatihTuncc
100 × 100 mm53 parts4LNo license2- schematic only · 10 partsSTM32
Hip
8adam95
10 partsNo license2 STM32
Hub
Bruhdows
148 × 78 mm309 parts4LNo license1STM32
Kinisi motor controller board
szolotykh
75 × 60 mm72 parts4LMIT1STM32
STM32F405RGT6-Breakout
MURPHYENGINEERING
100.2 × 101.1 mm58 parts4LNo license1STM32
STM32F405rg
Arpan12
61.2 × 47.5 mm50 parts4LNo license1ESP32
DroneHardware
GiovanniRaseraF
19.5 × 23.5 mm49 parts4LGPL-3.01STM32
STM32F4 REV0
Junaidk11
51 × 50.3 mm46 parts4LNo license1STM32
STM32F4-Test-Board
pravinsharma15k-ops
60.7 × 40 mm46 parts4LNo license1
How designs wire the STM32F405RGT6
Read from the KiCad layouts of 78 open source designs, one per repository: what each pin of the STM32F405RGT6 connects to, and the resistors, capacitors and other passives placed on it.
- The VCAP_1 pin has a capacitor to GND on 71 of 75 designs, most often 2.2 µF (then 100 nF).
- The VDD pins have a decoupling capacitor on 70 of 75 designs, most often 100 nF (then 4.7 µF).
- The VCAP_2 pin has a capacitor to GND on 70 of 75 designs, most often 2.2 µF.
- The VBAT pin has a decoupling capacitor on 67 of 78 designs, most often 100 nF (then 4.7 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 1 | Connected to: 3.3V 91% |
|
| PC13pin 2 | Connected to: Not connected 60% · a signal 38% | — |
| PC14pin 3 | Connected to: Not connected 68% · a signal 29% | — |
| PC15pin 4 | Connected to: Not connected 74% · a signal 25% | — |
| PH0pin 5 | Connected to: Signal 96% |
|
| PH1pin 6 | Connected to: Signal 99% |
|
| NRSTpin 7 | Connected to: A connector 64% |
|
| PC0pin 8 | Connected to: Not connected 62% · a signal 32% | — |
| VSSApin 12 | Connected to: GND 99% | — |
| VDDApin 13 | Connected to: 3.3V 91% |
|
| VSSpin 18, 63 | Connected to: GND 98% | — |
| VDDpin 19, 32, 48, 64 | Connected to: 3.3V 97% |
|
| PC5pin 25 | Connected to: Not connected 63% · a signal 36% | — |
| PB2pin 28 | Connected to: Not connected 53% · a signal 45% |
|
| VCAP_1pin 31 | Connected to: Signal 95% |
|
| VCAP_2pin 47 | Connected to: Signal 93% |
|
| PA15pin 50 | Connected to: Not connected 63% · a signal 37% | — |
| PD2pin 54 | Connected to: Not connected 65% · a signal 35% | — |
| PB4pin 56 | Connected to: Not connected 65% · a signal 35% | — |
| PB6pin 58 | Connected to: A connector 47% · not connected 25% |
|
| PB7pin 59 | Connected to: A connector 47% · not connected 25% |
|
| BOOT0pin 60 | Connected to: Signal 91% |
|
38 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Cheap-FOCer-2 by shamansystems, LittleBrain-STM32F4-Sensorboard by pms67, STM32F4-Reference-PCB by pms67 and FOC by nordstream3.
The STM32F405RGT6 in open source designs
The gallery holds 109 open source boards using the STM32F405RGT6 from 84 GitHub repositories; a typical one measures about 56 × 53.3 mm and carries around 67 components.
68% use four copper layers or more, and 39% carry an open source license.
The most starred is Cheap-FOCer-2 by shamansystems.
Parts used alongside the STM32F405RGT6
What boards using the STM32F405RGT6 are built for
STM32F405RGT6: common questions
Where can I find a STM32F405RGT6 reference design?
Each of the 109 boards on this page is a real design using the STM32F405RGT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the STM32F405RGT6 VCAP_1 pin connected?
The VCAP_1 pin has a capacitor to GND on 71 of 75 designs, most often 2.2 µF (then 100 nF). Counted from the KiCad layouts of 78 open source designs using the STM32F405RGT6.
What decoupling capacitors do designs use on the STM32F405RGT6 VDD pin?
The VDD pins have a decoupling capacitor on 70 of 75 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 78 open source designs using the STM32F405RGT6.
How is the STM32F405RGT6 VCAP_2 pin connected?
The VCAP_2 pin has a capacitor to GND on 70 of 75 designs, most often 2.2 µF. Counted from the KiCad layouts of 78 open source designs using the STM32F405RGT6.
What parts are used alongside the STM32F405RGT6?
The USBLC6-2SC6, MP2359DJ-LF-Z, AMS1117-3.3, W25Q128JVSIQ and AP2112K-3.3TRG1 appear in the most repositories here.
Which microcontrollers do boards using the STM32F405RGT6 use?
Most are built on STM32 (104) and ESP32 (5).
How big is a typical board using the STM32F405RGT6?
The median is 56 × 53.3 mm, and 32% are two-layer designs.
What is the most popular open source board using the STM32F405RGT6?
By GitHub stars, Cheap-FOCer-2 by shamansystems, with 406 stars.
Can I simulate one of these boards using the STM32F405RGT6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.