Noname THT
About the Noname THT PCB
Noname THT is an open source PCB design by AronAyub, published on GitHub. It is a 2-layer board measuring 30.1 × 52.1 mm, with 15 components from 10 distinct parts.
Other key parts include the LM7805_TO220. By type, the board carries 6 diodes, 3 connectors, 2 capacitors, 2 resistors, 1 IC and 1 switch.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
kicad design projects
In this repository I have provided my previous KICAD PCB Designs for: ### Arduino hat - this is a complete arduino hat, check the folder for files! it is among my first designs
- this is a simple power supply unit which accepts 12V, 1A and gives, 3V3 and 5V as output, it is among my first designs
- mini Pi Hat, one of my old PCB design projects !
Main components on the Noname THT
Noname THT bill of materials (BOM)
15 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM7805_TO220 | TO-220-3_Vertical | U1 |
| 1 | Barrel_Jack_Switch | BarrelJack_CUI_PJ-063AH_Horizontal | J1 |
| 2 | Conn_02x02_Counter_Clockwise | PinHeader_2x02_P2.54mm_Vertical | J2, J3 |
| 1 | SW_DPDT_x2 | SW_E-Switch_EG1224_SPDT_Angled | SW1 |
| 4 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 1 | LED | LED_D5.0mm | D5 |
| 1 | LED | LED_D5.0mm-3 | D6 |
| 1 | 47uF | CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 470uF | CP_Radial_D6.3mm_P2.50mm | C2 |
| 2 | 560 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
Noname THT design files
The KiCad project lives in the AronAyub/KICAD repository on GitHub; these links point at the commit this page was built from.
Noname THT: common questions
How big is the Noname THT PCB?
The Noname THT measures 30.1 × 52.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Noname THT?
15 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Noname THT design files?
From the AronAyub/KICAD repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Noname THT design in my own project?
The repository has no license, so all rights stay with AronAyub. Use it as a reference, and ask the author before reusing the design.
More boards in KICAD
AVR/ArduinoMATRIX PROJECT
128.8 × 81.8 mm77 parts2LNo license6
AVR/ArduinoPower cct
108.6 × 145 mm75 parts2LNo license6
SMART GRID
112.4 × 75.9 mm56 parts2LNo license6
STM32STRF Panel
39 × 31 mm38 parts4LNo license6
STM32STRF
39 × 15 mm38 parts4LNo license6
Transmier
55 × 55 mm18 parts2LNo license6
AVR/ArduinoArduino hat
57.1 × 33.9 mm17 parts4LNo license6
AVR/ArduinoProject3 4layer
57.1 × 33.9 mm17 parts4LNo license6
AVR/ArduinoProject3 2layer
57.1 × 33.9 mm17 parts2LNo license6
P supply
30.1 × 52.1 mm15 parts2LNo license6
Raspberry PiRaspberrypi hat
27 × 18.8 mm9 parts2LNo license6
Similar boards
134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979