Dx32 hacking
arsenixprime·dx32_hacking·hardware/bmdc_ram_interposer/bmdc_ram_interposer.kicad_pcb
About the Dx32 hacking PCB
Dx32 hacking is an open source PCB design by arsenixprime, published on GitHub. It is a 4-layer board measuring 11.8 × 27.6 mm, with 5 components from 2 distinct parts.
Other key parts include the CY7C1049G-10VXI. By type, the board carries 4 capacitors and 1 IC.
It belongs with the robotics & motion designs in this gallery.
From the project
LinuxCNC conversions for Bridgeport DX32 CNC machines
Castellated 4-layer interposer that puts a 36-lead 400-mil SOJ 512K x 8 SRAM (Infineon/Cypress CY7C1049G-10VXI, 5 V, 10 ns) on the 32-lead wide SOJ site of the Bridgeport BMDC3 card. Four of them replace U8..U11 (MCM6226BBXJ20, 128K x 8) and take the card from 512 KB to 2 MB. The card is not modified beyond swapping the chips and adding two jumper wires per interposer; the PAL address decoder is untouched. Background: ../../BMDCRAMUPGRADE.md.
Main components on the Dx32 hacking
Dx32 hacking bill of materials (BOM)
5 components, 2 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CY7C1049G-10VXI Infineon Technologies (Cypress) | SOJ-36_10.16x23.495mm_P1.27mm_ShortPads | U1 |
| 4 | CL05B104KO5NNNC 100nF Samsung Electro-Mechanics | C_0402_1005Metric | C1, C2, C3, C4 |
Dx32 hacking design files
The KiCad project lives in the arsenixprime/dx32_hacking repository on GitHub; these links point at the commit this page was built from.
Dx32 hacking: common questions
How big is the Dx32 hacking PCB?
The Dx32 hacking measures 11.8 × 27.6 mm, has 4 copper layers and is 1 mm thick.
How many components are on the Dx32 hacking?
5 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Dx32 hacking design files?
From the arsenixprime/dx32_hacking repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Dx32 hacking design in my own project?
The repository has no license, so all rights stay with arsenixprime. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979