EzCore
arthurnbr·ezCore·hardware/MeshTag.kicad_pcb
About the EzCore PCB
EzCore is an open source PCB design by arthurnbr, published on GitHub. It is a 2-layer board measuring 50 × 50 mm, with 13 components from 10 distinct parts.
By type, the board carries 5 capacitors, 2 switches, 2 diodes, 2 resistors, 1 connector and 1 battery holder.
It belongs with the rf & radio designs in this gallery.
From the project
Compagnon MeshCore ultra-compact en disque Ø48 mm (type AirTag) autour du Seeed XIAO nRF52840 + module LoRa Wio-SX1262 (EU868) : appairage BLE sans code, mise à jour OTA par application, antenne NFC ronde intégrée, LED bi-couleur de retour utilisateur, port de charge/flash magnét
Compagnon MeshCore ultra-compact en disque Ø48 mm (type AirTag) autour du Seeed XIAO nRF52840 + module LoRa Wio-SX1262 (EU868) : appairage BLE sans code, mise à jour OTA par application, antenne NFC ronde intégrée, LED bi-couleur de retour utilisateur, port de charge/flash magnétique 4 points (pogo), et batterie 1050 mAh au dos du boîtier.
Placement pensé usage, carte propre et symétrique :
EzCore bill of materials (BOM)
13 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | YZT0675-20048-04025-01 Xinyangze | MagPogo_4P_P2.50mm_YZT0675 | J5 |
| 1 | LIPO_1S LiPo_1S | Batt_WirePads_2x | BT1 |
| 1 | KMR221GLFS C&K | SW_Push_1P1T-SH_NO_CK_KMR2xxG | SW1 |
| 1 | PCM12SMTR C&K | SW_SPDT_PCM12 | SW3 |
| 1 | XL-1005SURC XL-1005SURC (rouge) XINGLIGHT | LED_0402_Red_XL-1005SURC | D1 |
| 1 | XL-1005UGC XL-1005UGC (vert) XINGLIGHT | LED_0402_Green_XL-1005UGC | D2 |
| 1 | CL05A106MQ5NUNC 10uF 6.3V X5R Samsung Electro-Mechanics | C_0402_1005Metric | C1 |
| 2 | CL05B104KO5NNNC 100nF 16V X7R Samsung Electro-Mechanics | C_0402_1005Metric | C2, C5 |
| 2 | 0402CG470J500NT 47pF 50V C0G FH (Guangdong Fenghua) | C_0402_1005Metric | C3, C4 |
| 2 | 0402WGF4700TCE 470R 1% UNI-ROYAL | R_0402 | R1, R2 |
EzCore design files
The KiCad project lives in the arthurnbr/ezCore repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/MeshTag.kicad_pcb
- Schematichardware/MeshTag.kicad_sch
- BOMhardware/fab/BOM.csv
EzCore: common questions
How big is the EzCore PCB?
The EzCore measures 50 × 50 mm, has 2 copper layers and is 1 mm thick.
How many components are on the EzCore?
13 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the EzCore design files?
From the arthurnbr/ezCore repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the EzCore design in my own project?
The repository has no license, so all rights stay with arthurnbr. Use it as a reference, and ask the author before reusing the design.
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568