NMR Control Board V 0.5
About the NMR Control Board V 0.5
NMR Control Board V 0.5 is an open source PCB design by ARTS-Laboratory, published on GitHub under the CC-BY-SA-4.0 license. It is a 4-layer board measuring 42 × 60 mm, with 44 components from 31 distinct parts.
By type, the board carries 15 capacitors, 7 diodes, 4 resistors and 1 inductor.
From the project
A compact Time-Domain Nuclear Magnetic Resonance (TD-NMR) system.
Main aspects of this version are: Compact control board designed with size weight and power (SWaP) constraints. A single large PCB measuring approximately 40 x 60 mm.
NMR Control Board V 0.5 bill of materials (BOM)
44 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NCP715-1.8v | SOT-353_SC-70-5 | 1.8v_reg |
| 1 | NCP1117-5.0_TO252 | TO-252-2 | 5v_reg |
| 1 | MountingHole_Pad | Pin_D1.0mm_L10.0mm | 12v |
| 1 | LM7812_TO220 | TO-263-3_TabPin2 | 12v_reg |
| 1 | 24V_AMP1 | SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | 24V_AMP1 |
| 1 | 24V_DC1 | SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | 24V_DC1 |
| 1 | LM828(-5v) | MF05A | -5v_reg |
| 1 | F_OUT1 | SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | F_OUT1 |
| 1 | INPUT1 | SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | INPUT1 |
| 1 | MIX_RF1 | SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | MIX_RF1 |
| 1 | OUTPUT1 | SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | OUTPUT1 |
| 1 | PULSE_GEN_IN1 | SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | PG1 |
| 1 | SIN_SIGNAL_IN1 | SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | SIN_SIGNAL_IN1 |
| 1 | SPL_IN1 | SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | SPL_IN1 |
| 1 | SW_OUT1 | SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | SW_OUT1 |
| 1 | TRIG_OUT1 | SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | TRIG_OUT1 |
| 1 | Z_MATCH1 | SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | Z_MATCH1 |
| 2 | D | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 2 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D3, D4 |
| 3 | D_Dual_Series_AKC | TSOT-23_HandSoldering | D5, D6, D7 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0.56uH | L_Axial_L5.3mm_D2.2mm_P7.62mm_Horizontal_Vishay_IM-1 | L1 |
| 1 | .33uF | C_1206_3216Metric | C1 |
| 3 | 1uF | C_1206_3216Metric | C2, C5, C6 |
| 4 | 10uF | C_1206_3216Metric | C3, C4, C7, C10 |
| 3 | 0.1uF | C_1206_3216Metric | C8, C9, C13 |
| 2 | 1nF | C_1206_3216Metric | C11, C12 |
| 2 | C | C_1210_3225Metric | C14, C15 |
| 1 | 12k | R_1206_3216Metric | R1 |
| 1 | 100k | R_1206_3216Metric | R2 |
| 1 | 1k | R_1206_3216Metric | R3 |
| 1 | 20k | R_1206_3216Metric | R4 |
NMR Control Board V 0.5 design files
The KiCad project lives in the ARTS-Laboratory/Compact-NMR repository on GitHub; these links point at the commit this page was built from.
NMR Control Board V 0.5: common questions
How big is the NMR Control Board V 0.5?
The NMR Control Board V 0.5 measures 42 × 60 mm, has 4 copper layers and is 1.599994 mm thick.
How many components are on the NMR Control Board V 0.5?
44 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the NMR Control Board V 0.5 design files?
From the ARTS-Laboratory/Compact-NMR repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the NMR Control Board V 0.5 design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which ARTS-Laboratory chose for the repository.
