NMR Control V0.4.1 - edited
About the NMR Control V0.4.1 - edited PCB
NMR Control V0.4.1 - edited is an open source PCB design by ARTS-Laboratory, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 139.7 × 88.9 mm, with 42 components from 23 distinct parts.
By type, the board carries 7 diodes and 2 capacitors.
From the project
A compact Time-Domain Nuclear Magnetic Resonance (TD-NMR) system.
Main aspects of this version are: Stable version with all components moved onto one control board that includes duplexer, voltage regulator, and amplifier on one control board. A single large PCB measuring approximately 90 x 140 mm.
NMR Control V0.4.1 - edited bill of materials (BOM)
42 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 0.1uF | C_1206_3216Metric | 0.1.uF1, 0.1uF2 |
| 1 | 0.1 uF | C_1206_3216Metric | 0.1uF1 |
| 1 | 0.33 uF | C_1206_3216Metric | 0.33uF1 |
| 1 | L | L_Axial_L5.3mm_D2.2mm_P7.62mm_Horizontal_Vishay_IM-1 | 0.56uH |
| 1 | NCP715-1.8V | SOT-353_SC-70-5 | 1.8V_Reg.1 |
| 4 | R | R_1206_3216Metric | 1kΩ1, 12kΩ1, 20kΩ1, 100kΩ1 |
| 2 | C | C_1206_3216Metric | 1nF1, 1nF2 |
| 3 | 1 uF | C_1206_3216Metric | 1uF1, 1uF2, 1uF3 |
| 1 | NCP1117-5.0_TO252 | TO-252-2 | 5V_REG1 |
| 1 | 10 uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | 10uF1 |
| 3 | 10 uF | C_1206_3216Metric | 10uF2, 10uF3, 10uF4 |
| 1 | LM7812_TO220 | TO-263-3_TabPin2 | 12V_REG1 |
| 3 | Conn_Coaxial | SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | 24V_DC_IN, TRIG_OUT_1, TRIG_OUT_2 |
| 2 | Conn_Coaxial | SMA_Amphenol_132291_Vertical | 24V_HP_AMP, SW_OUT1 |
| 2 | Pin Hole | Pin_D1.0mm_L10.0mm_LooseFit | +12V1, GND1 |
| 1 | LM828M5 | MF05A | -5V_REG1 |
| 1 | LM4565 | TSSOP-8_4.4x3mm_P0.65mm | LNA1 |
| 1 | ADE-6 | Mini-Circuits_CD542_LandPatternPL-052 | Mixer1 |
| 1 | ADP-2-1W | Mini-Circuits_CD636_LandPatternPL-035 | Power_Splitter1 |
| 1 | ADG901BRMZ | MSOP-8_3x3mm_P0.65mm | Switch1 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4 |
| 3 | D_Schottky_Dual_Series_AKC | TSOT-23_HandSoldering | D5, D6, D7 |
| 2 | C | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C14, C15 |
NMR Control V0.4.1 - edited design files
The KiCad project lives in the ARTS-Laboratory/Compact-NMR repository on GitHub; these links point at the commit this page was built from.
- LayoutSystem_development/Van-Hove/PCB_design/NMR Control Board v0.4.1/NMR Control Board V 0.4.1 - edited/NMR_Control_V0.4.1 - edited.kicad_pcb
- SchematicSystem_development/Van-Hove/PCB_design/NMR Control Board v0.4.1/NMR Control Board V 0.4.1 - edited/NMR_Control_V0.4.1 - edited.kicad_sch
- BOMSystem_development/magnet_design/A650-88/A650_BillofMaterials.xlsx
NMR Control V0.4.1 - edited: common questions
How big is the NMR Control V0.4.1 - edited PCB?
The NMR Control V0.4.1 - edited measures 139.7 × 88.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the NMR Control V0.4.1 - edited?
42 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the NMR Control V0.4.1 - edited design files?
From the ARTS-Laboratory/Compact-NMR repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the NMR Control V0.4.1 - edited design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which ARTS-Laboratory chose for the repository.
