NMR Control V0.4.1
About the NMR Control V0.4.1 PCB
NMR Control V0.4.1 is an open source PCB design by ARTS-Laboratory, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 139.7 × 88.9 mm, with 49 components from 24 distinct parts.
By type, the board carries 7 diodes and 2 capacitors.
From the project
A compact Time-Domain Nuclear Magnetic Resonance (TD-NMR) system.
Main aspects of this version are: Stable version with all components moved onto one control board that includes duplexer, voltage regulator, and amplifier on one control board. A single large PCB measuring approximately 90 x 140 mm.
NMR Control V0.4.1 bill of materials (BOM)
49 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 0.1uF | C_1206_3216Metric | 0.1.uF1, 0.1uF2 |
| 1 | 0.1 uF | C_1206_3216Metric | 0.1uF1 |
| 1 | 0.33 uF | C_1206_3216Metric | 0.33uF1 |
| 1 | L | L_Axial_L5.3mm_D2.2mm_P7.62mm_Horizontal_Vishay_IM-1 | 0.56uH |
| 1 | NCP715-1.8V | SOT-353_SC-70-5 | 1.8V_Reg.1 |
| 4 | R | R_1206_3216Metric | 1kΩ1, 12kΩ1, 20kΩ1, 100kΩ1 |
| 2 | C | C_1206_3216Metric | 1nF1, 1nF2 |
| 3 | 1 uF | C_1206_3216Metric | 1uF1, 1uF2, 1uF3 |
| 1 | NCP1117-5.0_TO252 | TO-252-2 | 5V_REG1 |
| 1 | 10 uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | 10uF1 |
| 3 | 10 uF | C_1206_3216Metric | 10uF2, 10uF3, 10uF4 |
| 1 | LM7812_TO220 | TO-263-3_TabPin2 | 12V_REG1 |
| 5 | Conn_Coaxial | SMA_Amphenol_132291_Vertical | 24V_AMP1, Input1, MIX_RF1, Output1, SW_OUT1 |
| 6 | Conn_Coaxial | SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | 24V_DC1, F_OUT1, PULSE_GEN_IN1, SIN_SIGNAL_IN1, SPL_IN1, TRIG_OUT1 |
| 2 | Pin Hole | Pin_D1.0mm_L10.0mm_LooseFit | +12V1, GND1 |
| 1 | LM828M5 | MF05A | -5V_REG1 |
| 1 | Conn_Coaxial | SMA_Amphenol_132134_Vertical | Impd_Match1 |
| 1 | LM4565 | TSSOP-8_4.4x3mm_P0.65mm | LNA1 |
| 1 | ADE-6 | Mini-Circuits_CD542_LandPatternPL-052 | Mixer1 |
| 1 | ADP-2-1W | Mini-Circuits_CD636_LandPatternPL-035 | Power_Splitter1 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ADG901BRMZ | MSOP-8_3x3mm_P0.65mm | Switch1 |
| 4 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4 |
| 3 | D_Schottky_Dual_Series_AKC | TSOT-23_HandSoldering | D5, D6, D7 |
| 2 | C | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C14, C15 |
NMR Control V0.4.1 design files
The KiCad project lives in the ARTS-Laboratory/Compact-NMR repository on GitHub; these links point at the commit this page was built from.
NMR Control V0.4.1: common questions
How big is the NMR Control V0.4.1 PCB?
The NMR Control V0.4.1 measures 139.7 × 88.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the NMR Control V0.4.1?
49 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the NMR Control V0.4.1 design files?
From the ARTS-Laboratory/Compact-NMR repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the NMR Control V0.4.1 design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which ARTS-Laboratory chose for the repository.
