TW-DALI-LED-Module

asafdabush·TW-DALI-LED-Module·hardware/TW_DALI_Module.kicad_pcb

TW-DALI-LED-Module layout, top view — open source STM32 board by asafdabush

About the TW-DALI-LED-Module

TW-DALI-LED-Module is an open source STM32 PCB design by asafdabush, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 50 × 50 mm, with 47 components from 31 distinct parts.

Its main chip is the STM32G071KBT6, from the STM32 family. Other key parts include the L78L33_SOT89, AL8860MP and TCMT1107. By type, the board carries 12 resistors, 11 capacitors, 7 diodes, 6 ICs, 4 connectors and 3 transistors.

From the project

A Ø50 mm round control-and-driver module for tunable-white (TW) COB LEDs. It takes a 24 V constant-voltage supply, drives a warm and a cool LED channel with independent constant-current buck regulators, and is controlled over an optically isolated DALI bus by an STM32G0 microcont

A Ø50 mm round control-and-driver module for tunable-white (TW) COB LEDs. It takes a 24 V constant-voltage supply, drives a warm and a cool LED channel with independent constant-current buck regulators, and is controlled over an optically isolated DALI bus by an STM32G0 microcontroller.

Personal hardware project, designed end to end in KiCad 9.

Status: schematic and 2-layer layout complete. Next steps are fabrication, bring-up and the DALI DT8 firmware.

TW-DALI-LED-Module, from the project README
From the project README

Main components on the TW-DALI-LED-Module

TW-DALI-LED-Module bill of materials (BOM)

47 components, 31 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
L78L33_SOT89
U1
2
AL8860MP
U2, U3
1
STM32G071KBT6
U4
2
TCMT1107
U5, U6
2
BC847
Q1, Q2
1
AO3400A
Q3
1
SCREW_TERMINAL_01X02
Screw_Terminal_01x02
J1
2
COB
J2, J3
1
DALI
J5
1
MB6S
BR1
1
1.1A
F1
1
SMBJ26A
D1
1
SS34
D2
2
PMEG4010CEH
D3, D4
1
SMBJ24A
D5
1
BZX384-C5V1
D6
1
BZX384-C10
D7
2
SRN6028C-470M
L1, L2
3
100NF/50V
100nF/50V
C1, C6, C8
1
10µF/50V
C2
Show 11 more
QtyPartRefs
1
330NF
330nF
C3
1
1µF
C4
2
4.7µF/50V
C5, C7
2
100NF
100nF
C9, C10
1
4.7µF
C11
2
1k
R1, R4
2
0.15Ω
R2, R5
4
10K
10k
R3, R6, R9, R11
2
100K
100k
R7, R12
1
680Ω
R8
1
330Ω
R10

TW-DALI-LED-Module design files

The KiCad project lives in the asafdabush/TW-DALI-LED-Module repository on GitHub; these links point at the commit this page was built from.

TW-DALI-LED-Module: common questions

What microcontroller does the TW-DALI-LED-Module use?

The TW-DALI-LED-Module is built around the STM32G071KBT6, from the STM32 family.

How big is the TW-DALI-LED-Module?

The TW-DALI-LED-Module measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the TW-DALI-LED-Module?

47 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the TW-DALI-LED-Module design files?

From the asafdabush/TW-DALI-LED-Module repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the TW-DALI-LED-Module design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which asafdabush chose for the repository.

Can I test firmware for the TW-DALI-LED-Module without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards