17 open source boards using the L78L33_SOT89
Real designs built with the L78L33_SOT89, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
SMDUv3
sabanekko3
57 × 25.9 mm66 parts4LCC-BY-NC-4.013STM32
Stm8-car ctrl
akrapivniy
100 × 40 mm51 parts2LGPL-3.06STM32
Ribbon Controller Main Board
JordanAceto
147.7 × 31.8 mm71 parts4LCC-BY-4.01STM32
Stm32 LORA TEMP PWM
Heorenmaru
55.3 × 35.9 mm58 parts2LCC-BY-SA-4.01STM32
Bms4-rust
GyrocopterLLC
50 × 35 mm58 parts2LMIT1STM32
Bms4-cpp
GyrocopterLLC
50 × 35 mm58 parts2LMIT0ESP32
MistFarm Embedded
Mistfarm
74.4 × 95.2 mm56 parts2LNo license0STM32
Stm8-car
akrapivniy
60 × 60 mm42 parts2LGPL-3.06Pwm2dc
Alex2269
20.3 × 17.8 mm22 parts2LNo license1STM32
Josh Ox Ribbon Synth Ribbon board
JordanAceto
193 × 69.9 mm151 parts4LCC-BY-4.01PowerSW
Heorenmaru
26.7 × 11.7 mm20 parts2LCC-BY-SA-4.01Heater shunt
Alex2269
23 × 17.2 mm17 parts2LNo license1STM32
Analog io board
borzeman
85 × 90 mm113 parts2LNo license0AVR/Arduino
XPS:Channel:Controller
yu2924
40.6 × 30.5 mm20 parts2LCC0-1.03Small shunt
Alex2269
19.8 × 15.1 mm17 parts2LNo license1Bord λ
Alex2269
51.2 × 81.8 mm14 parts2LNo license1STM32
Manipulator attachment
borzeman
38 × 42 mm64 parts2LNo license0
How designs wire the L78L33_SOT89
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the L78L33_SOT89 connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin has a capacitor to GND on 9 of 11 designs, most often 330 nF (then 2.2 µF).
- The OUT pin is tied to 3.3V on 10 of 11 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUTpin 1 | Connected to: 3.3V 91% | — |
| GNDpin 2 | Connected to: GND 100% | — |
| INpin 3 | Connected to: Signal 64% · BATT 36% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SMDUv3 by sabanekko3, Stm8-car by akrapivniy, XPS:Channel:Controller by yu2924 and Bord λ by Alex2269.
The L78L33_SOT89 in open source designs
The gallery holds 17 open source boards using the L78L33_SOT89 from 11 GitHub repositories; a typical one measures about 51.2 × 35 mm and carries around 56 components.
82% are two-layer designs, the rest use four layers or more, and 53% carry an open source license.
The most starred is SMDUv3 by sabanekko3.
Parts used alongside the L78L33_SOT89
Microcontrollers on boards using the L78L33_SOT89
What boards using the L78L33_SOT89 are built for
L78L33_SOT89: common questions
Where can I find a L78L33_SOT89 reference design?
Each of the 17 boards on this page is a real design using the L78L33_SOT89. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the L78L33_SOT89 IN pin connected?
The IN pin has a capacitor to GND on 9 of 11 designs, most often 330 nF (then 2.2 µF). Counted from the KiCad layouts of 11 open source designs using the L78L33_SOT89.
How is the L78L33_SOT89 OUT pin connected?
The OUT pin is tied to 3.3V on 10 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the L78L33_SOT89.
What parts are used alongside the L78L33_SOT89?
The L78L05_SOT89, ISO7721D, OPA2171 and STM32F051K8Tx appear in the most repositories here.
Which microcontrollers do boards using the L78L33_SOT89 use?
Most are built on STM32 (10), AVR/Arduino (1) and ESP32 (1).
How big is a typical board using the L78L33_SOT89?
The median is 51.2 × 35 mm, and 82% are two-layer designs.
What is the most popular open source board using the L78L33_SOT89?
By GitHub stars, SMDUv3 by sabanekko3, with 13 stars.
Can I simulate one of these boards using the L78L33_SOT89 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.