HardLabs

MicLed

Ashok-0167·PCB-by-Kicad·ledMic/micLed.kicad_pcb

MicLed PCB layout, top view — open source AVR/Arduino board by Ashok-0167

About the MicLed PCB

MicLed is an open source AVR/Arduino PCB design by Ashok-0167, published on GitHub. It is a 2-layer board measuring 88 × 88 mm, with 8 components from 8 distinct parts.

Its main chip is the ATtiny85V-10P, from the AVR/Arduino family. By type, the board carries 3 resistors, 1 IC, 1 battery holder, 1 microphone, 1 switch and 1 diode.

It belongs with the power & battery and sensors designs in this gallery.

From the project

2. Open the project in KiCad: - Open KiCad and load the required .pro file. - Access the schematic editor and PCB layout as needed. 3. Generate Gerber files for manufacturing: - Use KiCad's "Plot" function to export Gerber files.

2. Open the project in KiCad: - Open KiCad and load the required .pro file. - Access the schematic editor and PCB layout as needed. 3. Generate Gerber files for manufacturing: - Use KiCad's "Plot" function to export Gerber files.

For any questions or collaborations, contact me at [gokul567gd@gmail.com].

Main components on the MicLed

ATtiny85V-10P

MicLed bill of materials (BOM)

8 components, 8 distinct parts.

QtyPartRefs
1
ATtiny85V-10P
U1
1
3.3v cell
BT1
1
Microphone
MK1
1
SW_DPDT_x2
SW1
1
LED
D1
1
10k
R2
1
R
R3
1
470
R4

MicLed design files

The KiCad project lives in the Ashok-0167/PCB-by-Kicad repository on GitHub; these links point at the commit this page was built from.

MicLed: common questions

What microcontroller does the MicLed use?

The MicLed is built around the ATtiny85V-10P, from the AVR/Arduino family.

How big is the MicLed PCB?

The MicLed measures 88 × 88 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MicLed?

8 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the MicLed design files?

From the Ashok-0167/PCB-by-Kicad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the MicLed design in my own project?

The repository has no license, so all rights stay with Ashok-0167. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MicLed without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in PCB-by-Kicad

Similar boards