12 open source boards using the ATtiny85V-10P
Real designs built with the ATtiny85V-10P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Kicad-7-Series
pcbcupid
60 × 60 mm9 parts2LMIT37AVR/Arduino
PCB Design DD
Vishwakarma10036
60 × 60 mm9 parts2LNo license10AVR/Arduino
Modified sine inverter gwo pid
mofaa69
92.7 × 91.4 mm30 parts2LNo license1AVR/Arduino
Kicad ambient led system
jay-waghmare
60 × 60 mm9 parts2LMIT1AVR/Arduino
Laser rifle
Dade3e
56 × 15.6 mm27 parts2LNo license0AVR/Arduino
Attiny light
amnessa
33 × 33 mm27 parts2LNo license0AVR/Arduino
Tech diya
ankurlearner1
61 × 61 mm9 parts2LMIT0AVR/Arduino
Attiny oil lamp
ktauchathuranga
60 × 60 mm9 parts2LNo license0AVR/Arduino
Lr 40
Dade3e
39 × 19 mm27 parts2LNo license0AVR/Arduino
MCL8080
MicroCoreLabs
36.3 × 40.8 mm10 parts2LNo license532AVR/Arduino
MicLed
Ashok-0167
88 × 88 mm8 parts2LNo license0AVR/Arduino
MicLed
gokul-rm
88 × 88 mm8 parts2LNo license0
How designs wire the ATtiny85V-10P
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the ATtiny85V-10P connects to, and the resistors, capacitors and other passives placed on it.
- The XTAL2/PB4 pin is left unconnected on 10 of 11 designs.
- The RESET/PB5 pin is left unconnected on 9 of 11 designs (a signal on 2).
- The AREF/PB0 pin is left unconnected on 7 of 11 designs (a signal on 4).
- The XTAL1/PB3 pin has a pull-up to 3.3V on 5 of 11 designs, most often 5.6 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| RESET/PB5pin 1 | Connected to: Not connected 82% · a signal 18% | — |
| XTAL1/PB3pin 2 | Connected to: Signal 55% · not connected 45% |
|
| XTAL2/PB4pin 3 | Connected to: Not connected 91% | — |
| GNDpin 4 | Connected to: GND 100% | — |
| AREF/PB0pin 5 | Connected to: Not connected 64% · a signal 36% | — |
| PB2pin 7 | Connected to: Signal 64% · not connected 36% |
|
| VCCpin 8 | Connected to: 3.3V 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MCL8080 PCB by MicroCoreLabs, Kicad-7-Series by pcbcupid, PCB Design DD by Vishwakarma10036 and Kicad ambient led system by jay-waghmare.
The ATtiny85V-10P in open source designs
The gallery holds 12 open source boards using the ATtiny85V-10P from 11 GitHub repositories; a typical one measures about 60 × 60 mm and carries around 9 components.
100% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is MCL8080 PCB by MicroCoreLabs.
Microcontrollers on boards using the ATtiny85V-10P
What boards using the ATtiny85V-10P are built for
ATtiny85V-10P: common questions
Where can I find a ATtiny85V-10P reference design?
Each of the 12 boards on this page is a real design using the ATtiny85V-10P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ATtiny85V-10P XTAL2/PB4 pin connected?
The XTAL2/PB4 pin is left unconnected on 10 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the ATtiny85V-10P.
How is the ATtiny85V-10P RESET/PB5 pin connected?
The RESET/PB5 pin is left unconnected on 9 of 11 designs (a signal on 2). Counted from the KiCad layouts of 11 open source designs using the ATtiny85V-10P.
How is the ATtiny85V-10P AREF/PB0 pin connected?
The AREF/PB0 pin is left unconnected on 7 of 11 designs (a signal on 4). Counted from the KiCad layouts of 11 open source designs using the ATtiny85V-10P.
Which microcontrollers do boards using the ATtiny85V-10P use?
Most are built on AVR/Arduino (12).
How big is a typical board using the ATtiny85V-10P?
The median is 60 × 60 mm, and 100% are two-layer designs.
What is the most popular open source board using the ATtiny85V-10P?
By GitHub stars, MCL8080 PCB by MicroCoreLabs, with 532 stars.
Can I simulate one of these boards using the ATtiny85V-10P before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.