STM32-Custom-Development-Board

Ashu21-pro·STM32-Custom-Development-Board·Design files/stm32_sch.kicad_pcb

STM32-Custom-Development-Board layout, top view — open source STM32 board by Ashu21-pro

About the STM32-Custom-Development-Board

STM32-Custom-Development-Board is an open source STM32 PCB design by Ashu21-pro, published on GitHub. It is a 2-layer board measuring 38.7 × 36.2 mm, with 28 components from 18 distinct parts.

Its main chip is the STM32F103CBTX, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 13 capacitors, 5 resistors, 4 connectors, 2 ICs, 1 crystal and 1 switch.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Custom STM32 PCB designed using KiCad, featuring power circuitry, UART, and SWD interfaces.

Main components on the STM32-Custom-Development-Board

STM32-Custom-Development-Board bill of materials (BOM)

28 components, 18 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AMS1117-3.3
U1
1
STM32F103CBTX
STM32F103CBTx
U2
1
16MHZ
16MHz
Y1
1
USB_B_Micro
J1
3
CONN_01X04_PIN
Conn_01x04_Pin
J2, J3, J4
1
SW_SPDT
SW1
1
YELLOW
D1
1
120R
FB1
2
100NF
100nF
C1, C2
1
100NF
100nF
C3
2
100NF
100nF
C4, C9
1
10UF
10uF
C5
1
10N
10n
C6
2
1UF
1uF
C7, C8
2
10PF
10pF
C10, C11
2
22UF
22uF
C12, C13
1
10K
10k
R1
4
1.5K
1.5k
R2, R3, R4, R5

STM32-Custom-Development-Board design files

The KiCad project lives in the Ashu21-pro/STM32-Custom-Development-Board repository on GitHub; these links point at the commit this page was built from.

STM32-Custom-Development-Board: common questions

What microcontroller does the STM32-Custom-Development-Board use?

The STM32-Custom-Development-Board is built around the STM32F103CBTX, from the STM32 family.

How big is the STM32-Custom-Development-Board?

The STM32-Custom-Development-Board measures 38.7 × 36.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32-Custom-Development-Board?

28 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the STM32-Custom-Development-Board design files?

From the Ashu21-pro/STM32-Custom-Development-Board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the STM32-Custom-Development-Board design in my own project?

The repository has no license, so all rights stay with Ashu21-pro. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the STM32-Custom-Development-Board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards