HardLabs

Astroplant AL

AstroPlant·astroplant-hardware·Electronics/PCB/AstroPlant_ExtensionBoard/astroplant-extension-board-mk0-7/Astroplant_AL.kicad_pcb

Astroplant AL PCB layout, top view — open source STM32 board by AstroPlant

About the Astroplant AL PCB

Astroplant AL is an open source STM32 PCB design by AstroPlant, published on GitHub. It is a 2-layer board measuring 100 × 65 mm, with 100 components from 37 distinct parts.

Its main chip is the STM32WB55RGV6, from the STM32 family. Other key parts include the USBLC6-2SC6. By type, the board carries 27 resistors, 26 connectors, 21 capacitors, 6 diodes, 5 transistors and 5 switches.

It belongs with the sensors designs in this gallery.

From the project

Raw data files for hardware PCB's

With the astroplant-kit you need 2 jumper : connect 3.3V with the onboard generator connect 5V to the Board 5V input,

The BOM is available in the main folder, as it is not part of the manufacturing files.

First you'll need Kicad 7.0: https://www.kicad.org/download/ Then open the project by executing the .kicadpro file, you will then be able to see the different elements of the project such as the schematic and the pcb, If you want the gerber or drill map, open the pcb editor (.kicadpcb) and go "File -> Fabrication output ->Gerbers/Drill/Component Placement/BOM". For each file, select the…

Main components on the Astroplant AL

USBLC6-2SC6STM32WB55RGV6

Astroplant AL bill of materials (BOM)

100 components, 37 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
USBLC6-2SC6
U1
1
STM32WB55RGV6
U2
5
IRLML6344TRPBF
Q1, Q2, Q3, Q4, Q5
1
NX2016SA-32M-EXS00A-CS06465
Y1
1
B6B-XH-A(LF)(SN)
J1
1
61304021121
J2
4
B3B-XH-A(LF)(SN)
J3, J4, J7, J9
7
B2B-XH-A(LF)(SN)
J5, J8, J11, J16, J17, J18, J19
7
B4B-XH-A(LF)(SN)
J10, J22, J23, J24, J25, J26, J27
1
CONUFL001-SMD-T
J12
1
B5B-XH-A(LF)(SN)
J13
1
61300621121
J14
1
ZX62D-B-5PA8(30)
ZX62D-B-5PA8_30_
J15
2
691102710002
J20, J21
1
Antenna
AE1
1
DEA162450BT-1260B2
FL1
1
61300311121
JP5
1
LD39050PU33R
PS1
5
430156043726
SW1, SW2, SW3, SW4, SW5
1
BAT54KFILM
D1
Show 17 more
QtyPartRefs
3
S1A-13-F
D2, D3, D4
1
SML-D12D8WT8
D5
1
SMLEN3BC8TT86
D6
2
LQG15HS3N6S02D
L1, L3
1
LQG15HS2N7S02J
L2
10
VJ0603Y104MXJCW1BC
C1, C2, C5, C9, C10, C11, C12, C14 +2
1
875115150005
C3
1
875115652007
C4
4
GRM1555C1H1R2WA01D
C6, C19, C20, C21
1
GRM1555C1HR30WA01D
C7
1
GRM1555C1HR80BA01D
C8
1
VJ0603Y101KXQPW1BC
C13
2
GRM185R61C105KE44D
C15, C16
11
CRCW060310K0DHEAP
R1, R2, R3, R4, R5, R7, R8, R9 +3
12
CRCW06031K00DHEBP
R6, R13, R14, R15, R16, R17, R18, R19 +4
2
CRCW0603180RFKEA
R11, R27
2
CRCW04020000Z0EDC
R25, R26

Astroplant AL design files

The KiCad project lives in the AstroPlant/astroplant-hardware repository on GitHub; these links point at the commit this page was built from.

Astroplant AL: common questions

What microcontroller does the Astroplant AL use?

The Astroplant AL is built around the STM32WB55RGV6, from the STM32 family.

How big is the Astroplant AL PCB?

The Astroplant AL measures 100 × 65 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Astroplant AL?

100 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Astroplant AL design files?

From the AstroPlant/astroplant-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Astroplant AL design in my own project?

The repository has no license, so all rights stay with AstroPlant. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Astroplant AL without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in astroplant-hardware

Similar boards