15 open source boards using the STM32WB55RGV6

Real designs built with the STM32WB55RGV6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the STM32WB55RGV6

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the STM32WB55RGV6 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDDA pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF).
  • The VDD pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 4.7 µF).
  • The VDDRF pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 100 pF).
  • The OSC_OUT pin has a crystal on 6 of 6 designs, most often 32 MHz (then 8 MHz).
VBATpin 1Connected to: Not connected 33% · 3.3V 33% · a signal 33%
  • Capacitor to GND on 50% · 100 nF (4), 47 µF (3)
PC13pin 2Connected to: Not connected 67% · a signal 33%
PC14pin 3Connected to: Signal 67% · not connected 33%
  • Crystal on 50% · 32.768 kHz (1)
  • Capacitor to GND on 50% · 10 pF (2), 3 e-13F (1)
PC15pin 4Connected to: Signal 67% · not connected 33%
  • Crystal on 50% · 32.768 kHz (1)
  • Capacitor to GND on 50% · 10 pF (2), 8 e-13F (1)
PH3pin 5Connected to: Signal 67% · GND 33%
  • Resistor to GND on 67% · 10 kΩ (2), 100 kΩ (1)
PB8pin 6Connected to: W25N01GVZEIG 33%
  • Pull-up to 3.3V on 50% · 4.7 kΩ (2), 1.5 kΩ (1)
PB9pin 7Connected to: W25N01GVZEIG 33% · not connected 17%
  • Pull-up to 3.3V on 50% · 4.7 kΩ (2), 1.5 kΩ (1)
NRSTpin 8Connected to: A connector 50%
  • Capacitor to GND on 50% · 100 nF (2)
  • Pull-up to 3.3V on 33% · 10 kΩ (1), 100 kΩ (1)
PC1pin 10Connected to: Not connected 83% · a signal 17%
VREF+pin 13Connected to: Signal 67% · not connected 17% · 3.3V 17%
  • Capacitor to GND on 83% · 100 nF (4), 1 µF (3), 10 µF (2)
  • Inductor on 33% · 1 mH (2)
VDDApin 14Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 100% · 100 nF (9), 1 µF (5), 10 nF (3)
  • Ferrite bead on 33%
PA0pin 15Connected to: Signal 100%
  • Series resistor on 83% · 10 kΩ (3), 1 kΩ (1)
PA1pin 16Connected to: Signal 67% · not connected 33%
  • Series resistor on 67% · 10 kΩ (2), 1 kΩ (1)
PA2pin 17Connected to: W25N01GVZEIG 33% · not connected 33%
  • Series resistor on 33% · 1 kΩ (1)
PA3pin 18Connected to: W25N01GVZEIG 33% · not connected 33%
  • Series resistor on 33% · 1 kΩ (1)
PA4pin 19Connected to: Not connected 67% · a signal 33%
PA5pin 20Connected to: Not connected 67% · a signal 33%
PC4pin 25Connected to: Not connected 83% · a signal 17%
PC5pin 26Connected to: Signal 67% · not connected 33%
  • Series resistor on 50% · 10 kΩ (2)
PB2pin 27Connected to: Not connected 50% · a signal 50%
  • Series resistor on 33% · 10 kΩ (2)
PB11pin 29Connected to: Not connected 67% · a signal 33%
VDDpin 30, 45, 68Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (37), 4.7 µF (5), 100 pF (3)
RF1pin 31Connected to: Signal 100%
  • Capacitor to GND on 67% · 3 e-13F (2), 8 e-13F (1)
  • Inductor on 67% · 2.7 nH (3)
VSSRFpin 32Connected to: GND 100%
VDDRFpin 33Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (14), 100 pF (3), 4.7 µF (2)
OSC_OUTpin 34Connected to: Signal 100%
  • Crystal on 100% · 32 MHz (4), 8 MHz (1)
  • Capacitor to GND on 50% · 30 pF (1), 20 pF (1), 8.2 pF (1)
OSC_INpin 35Connected to: Signal 100%
  • Crystal on 100% · 32 MHz (4), 8 MHz (1)
  • Capacitor to GND on 50% · 30 pF (1), 20 pF (1), 8.2 pF (1)
AT0pin 36Connected to: Not connected 100%
AT1pin 37Connected to: Not connected 100%
PE4pin 40Connected to: Not connected 67% · a signal 33%
VFBSMPSpin 41Connected to: Signal 83% · 3.3V 17%
  • Capacitor to GND on 100% · 4.7 µF (5)
  • Inductor on 83% · 10 µH (2), 74.5 GH (2), 2.2 µH (1)
VSSSMPSpin 42Connected to: GND 100%
VLXSMPSpin 43Connected to: Signal 83% · 3.3V 17%
  • Inductor on 83% · 74.5 GH (2), 10 µH (1), 10 nH (1)
VDDSMPSpin 44Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 100% · 100 nF (11), 4.7 µF (5), 1 µF (1)
PB12pin 46Connected to: Not connected 83% · a signal 17%
PB13pin 47Connected to: Not connected 67% · a signal 33%
PB14pin 48Connected to: Not connected 67% · a signal 33%
VDDUSBpin 55Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (14), 4.7 µF (2), 4.7 pF (1)
PA15pin 57Connected to: Not connected 83% · a signal 17%
PC10pin 58Connected to: Signal 67% · not connected 33%
  • Series resistor on 33% · 100 Ω (1)

27 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Board by notaroomba, Astroplant AL by AstroPlant, SAFE-ROOM by dibreyjonatan and MircoMouse by Karanami.

The STM32WB55RGV6 in open source designs

The gallery holds 15 open source boards using the STM32WB55RGV6 from 6 GitHub repositories; a typical one measures about 100 × 30 mm and carries around 159 components.

93% use four copper layers or more, and 73% carry an open source license.

The most starred is Board by notaroomba.

Microcontrollers on boards using the STM32WB55RGV6

What boards using the STM32WB55RGV6 are built for

STM32WB55RGV6: common questions

Where can I find a STM32WB55RGV6 reference design?

Each of the 15 boards on this page is a real design using the STM32WB55RGV6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32WB55RGV6 VDDA pin?

The VDDA pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the STM32WB55RGV6.

What decoupling capacitors do designs use on the STM32WB55RGV6 VDD pin?

The VDD pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 6 open source designs using the STM32WB55RGV6.

What decoupling capacitors do designs use on the STM32WB55RGV6 VDDRF pin?

The VDDRF pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 100 pF). Counted from the KiCad layouts of 6 open source designs using the STM32WB55RGV6.

What parts are used alongside the STM32WB55RGV6?

The USBLC6-2SC6, DRV8212PDSGR, LM1117MP-3.3, LSM6DSLTR and SN74LVC1G18DBVRG4 appear in the most repositories here.

Which microcontrollers do boards using the STM32WB55RGV6 use?

Most are built on STM32 (15).

How big is a typical board using the STM32WB55RGV6?

The median is 100 × 30 mm, and 7% are two-layer designs.

What is the most popular open source board using the STM32WB55RGV6?

By GitHub stars, Board by notaroomba, with 9 stars.

Can I simulate one of these boards using the STM32WB55RGV6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part