WiredController
About the WiredController PCB
WiredController is an open source AVR/Arduino PCB design by asukiaaa, published on GitHub. It is a 2-layer board measuring 90 × 50 mm, with 35 components from 16 distinct parts.
Its main chip is the ATMEGA328P-MU, from the AVR/Arduino family. Other key parts include the LP2985-33DBVR. By type, the board carries 9 resistors, 8 capacitors, 5 connectors, 4 switches, 4 diodes and 3 jumpers.
From the project
A wired controller that communicate in I2C.
A wired controller that communicate in I2C with using a library.
- WiredController - SwitchSceince - WiredController_asukiaaa
Main components on the WiredController
WiredController bill of materials (BOM)
35 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LP2985-33DBVR LP2985-3.3 | SOT-23-5 | U1 |
| 1 | ATMEGA328P-MU ATmega328P-MU | QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm | U2 |
| 1 | Joystick | PS4tJoystick | J1 |
| 1 | Conn_01x06 | 2x03_P2.54mm_Pads | J2 |
| 1 | Conn_01x04 | NS-Tech_Grove_1x04_P2mm_Horizontal | J3 |
| 1 | Conn_01x04 | TerminalBlock_bornier-4_P5.08mm | J4 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 3 | Jumper_NO | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3 |
| 4 | SW_Push | SW_Center_PUSH-12mm | SW1, SW2, SW3, SW4 |
| 4 | 17-215SYGC/S530-E2/TR8 LED | LED_0603_1608Metric | D1, D2, D3, D4 |
| 1 | CC0603KRX7R8BB105 1u | C_0603_1608Metric | C1 |
| 1 | CC0603KRX7R9BB103 10n | C_0603_1608Metric | C2 |
| 1 | CC0603KRX7R6BB225 2.2u | C_0603_1608Metric | C3 |
| 5 | CC0603KRX7R9BB104 0.1u | C_0603_1608Metric | C4, C7, C8, C9, C10 |
| 6 | RC0603JR-071KL 1k | R_0603_1608Metric | R1, R2, R3, R4, R5, R6 |
| 3 | 10k | R_0603_1608Metric | R7, R8, R9 |
WiredController design files
The KiCad project lives in the asukiaaa/WiredControllerPcb repository on GitHub; these links point at the commit this page was built from.
WiredController: common questions
What microcontroller does the WiredController use?
The WiredController is built around the ATMEGA328P-MU, from the AVR/Arduino family.
How big is the WiredController PCB?
The WiredController measures 90 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the WiredController?
35 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the WiredController design files?
From the asukiaaa/WiredControllerPcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the WiredController design in my own project?
The repository has no license, so all rights stay with asukiaaa. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the WiredController without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k
AVR/ArduinoMegadesk
gcormier
41.7 × 32.2 mm23 parts2LGPL-3.0818
AVR/ArduinoEasyduino Atmega Nano
Hanqaqa
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746