Display board
atomic14·cube-display·display-board/display-board.kicad_pcb
About the Display board
Display board is an open source PCB design by atomic14, published on GitHub. It is a 2-layer board measuring 85 × 85 mm, with 19 components from 9 distinct parts.
Other key parts include the KingBright_PSA08-11 and HT16K33-28pin. By type, the board carries 5 ICs, 5 diodes, 3 jumpers, 3 resistors and 2 capacitors.
It belongs with the displays & leds and sensors designs in this gallery.
From the project
I'm currently testing the first set of PCBs. There will be updates as I find issues!
I'm currently testing the first set of PCBs. There will be updates as I find issues!
You can see some of the testing so far on my YouTube channel: atomic14.
The demo above is using the code from here.
- display-board: 14 segment display board - main-board: main board for the display-board - main-board-tft: WIP - not complete.

Main components on the Display board
Display board bill of materials (BOM)
19 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | KingBright_PSA08-11 | DIP-18_600_ELL | U1, U2, U3, U4 |
| 1 | HT16K33-28pin | SOIC-28W_7.5x18.7mm_P1.27mm | U5 |
| 3 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3 |
| 1 | BM04B-SRSS-TB(LF)(SN) | CONN-SMD_BM04B-SRSS-TB | QWIIC1 |
| 4 | LED_RCGB | KAA-3528RGBS-11 | D1, D2, D3, D4 |
| 1 | D | D_SOD-323 | D5 |
| 1 | 100nF | C_0603_1608Metric | C1 |
| 1 | 47uF | C_0603_1608Metric | C2 |
| 3 | 22k | R_0603_1608Metric | R1, R2, R3 |
Display board design files
The KiCad project lives in the atomic14/cube-display repository on GitHub; these links point at the commit this page was built from.
Display board: common questions
How big is the Display board?
The Display board measures 85 × 85 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Display board?
19 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Display board design files?
From the atomic14/cube-display repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Display board design in my own project?
The repository has no license, so all rights stay with atomic14. Use it as a reference, and ask the author before reusing the design.
More boards in cube-display
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k