Main board tft
atomic14·cube-display·main-board-tft/main-board-tft.kicad_pcb
About the Main board tft
Main board tft is an open source ESP32 PCB design by atomic14, published on GitHub. It is a 2-layer board measuring 34 × 34 mm, with 44 components from 29 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the USBLC6-2P6, NCP167BMX330TBG, TPS2117DRLR_C22399676, OWMMOD-403010A-S261F and TP4057. By type, the board carries 13 resistors, 11 capacitors, 10 ICs, 4 connectors, 2 switches and 1 transistor.
It belongs with the displays & leds and sensors designs in this gallery.
From the project
I'm currently testing the first set of PCBs. There will be updates as I find issues!
I'm currently testing the first set of PCBs. There will be updates as I find issues!
You can see some of the testing so far on my YouTube channel: atomic14.
The demo above is using the code from here.
- display-board: 14 segment display board - main-board: main board for the display-board - main-board-tft: WIP - not complete.

Main components on the Main board tft
Main board tft bill of materials (BOM)
44 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2P6 | SOT-666 | U1 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U2 |
| 1 | NCP167BMX330TBG | VREG_NCP167BMX330TBG | U3 |
| 1 | TPS2117DRLR_C22399676 | SOT-583-8 | U4 |
| 1 | OWMMOD-403010A-S261F | MIC_OWMMOD-403010A-S261F | U5 |
| 1 | TP4057 | SOT-23-6 | U6 |
| 1 | MAX98357AETE+T | Maxim_Electronics-21-0896-0-0-0 | U7 |
| 1 | MSS12C02LS-BB2.0 | SW-SMD_MSS12C02LS-HB2.0-1 | U8 |
| 1 | TYPE-C 16PLT-H10.0 | TYPE-C-SMD_USB4120-03-C | U9 |
| 1 | LSM6DS3 | LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U10 |
| 1 | TPNTA4153NT1G | SOT-523 | Q2 |
| 4 | Conn_01x01_Pin | SolderWirePad_1x01_SMD_1x2mm | J6, J7, J8, J9 |
| 1 | FPC 0.5MM 14P Vertical mounting type H2.0mm | FPC-SMD_14P-P1.00-AFC11-S14ICC-00 | FPC1 |
| 1 | BM04B-SRSS-TB(LF)(SN) | CONN-SMD_BM04B-SRSS-TB | QWIIC1 |
| 2 | TS-1088-AR02016 | SW-SMD_L3.9-W3.0-P4.45 | SW1, SW2 |
| 1 | LED_RCGB | KAA-3528RGBS-11 | D2 |
| 1 | 1uF | C_0402_1005Metric | C1 |
| 3 | 22uF | C_0402_1005Metric | C2, C4, C10 |
| 3 | 2.2uF | C_0402_1005Metric | C3, C6, C9 |
| 2 | 0.1uF | C_0402_1005Metric | C5, C8 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 100nf | C_0402_1005Metric | C7, C11 |
| 3 | 5.1K | R_0402_1005Metric | R1, R2, R3 |
| 2 | 10K | R_0402_1005Metric | R4, R5 |
| 1 | 634K | R_0402_1005Metric | R6 |
| 1 | 2.2K | R_0402_1005Metric | R7 |
| 3 | 100 | R_0402_1005Metric | R8, R9, R10 |
| 1 | 100R | R_0402_1005Metric | R11 |
| 1 | 10R 0.5W | R_0603_1608Metric | R12 |
| 1 | 100K | R_0402_1005Metric | R14 |
Main board tft design files
The KiCad project lives in the atomic14/cube-display repository on GitHub; these links point at the commit this page was built from.
Main board tft: common questions
What microcontroller does the Main board tft use?
The Main board tft is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Main board tft?
The Main board tft measures 34 × 34 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Main board tft?
44 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the Main board tft design files?
From the atomic14/cube-display repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Main board tft design in my own project?
The repository has no license, so all rights stay with atomic14. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Main board tft without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in cube-display
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k