Boost19 v
About the Boost19 v PCB
Boost19 v is an open source PCB design by AUV-IITK, published on GitHub. It is a 2-layer board measuring 43 × 37.1 mm, with 19 components from 19 distinct parts.
Other key parts include the TPS55340QRTERQ1. By type, the board carries 2 diodes, 1 IC, 1 connector and 1 inductor.
From the project
The simulation has been run on TINA-TI Spice software. Download from here Link.
The simulation has been run on TINA-TI Spice software. Download from here Link.
Results of a simulation on the Webench have been placed in the in the simulation output folder.
To run simulation download the schematic and open with TINA-TI.
Main components on the Boost19 v
Boost19 v bill of materials (BOM)
19 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS55340QRTERQ1 | TPS55340QRTERQ1_002 | U1 |
| 1 | 8P4C | 436500400 | J1 |
| 1 | Rcomp | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | 1.15k1 |
| 1 | R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | 1k1 |
| 1 | Coutx | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | 1uF1 |
| 1 | Ccomp2 | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | 3.9nF1 |
| 1 | Rfbb | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | 10k1 |
| 1 | Cout | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | 10uF1 |
| 1 | Cout2 | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | 10uF2 |
| 1 | Ccomp | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | 15nF1 |
| 1 | Css | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | 22nF1 |
| 1 | Cin | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | 22uF1 |
| 1 | Cin2 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | 22uF2 |
| 1 | Rt | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | 25.5k1 |
| 1 | Cinx | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | 100nF1 |
| 1 | Rftbt | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | 143k1 |
| 1 | 60.0V | D_PowerDI-5 | D1 |
| 1 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | 1.2uH | L_Wuerth_MAPI-4030 | L1 |
Boost19 v design files
The KiCad project lives in the AUV-IITK/electrical-systems repository on GitHub; these links point at the commit this page was built from.
Boost19 v: common questions
How big is the Boost19 v PCB?
The Boost19 v measures 43 × 37.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Boost19 v?
19 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Boost19 v design files?
From the AUV-IITK/electrical-systems repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Boost19 v design in my own project?
The repository has no license, so all rights stay with AUV-IITK. Use it as a reference, and ask the author before reusing the design.
