USB-HUB
avadsariya0-coder·USB-HUB·P.C.B/HUB.kicad_pcb
About the USB-HUB PCB
USB-HUB is an open source PCB design by avadsariya0-coder, published on GitHub under the MIT license. It is a 2-layer board measuring 34.5 × 40.5 mm, with 30 components from 10 distinct parts.
Other key parts include the SL2.1A. By type, the board carries 11 capacitors, 11 resistors, 5 connectors, 2 diodes and 1 IC.
It belongs with the usb & debug tools designs in this gallery.
From the project
USB HUB is a custom designed USB HUB and is built using the SL2.1A USB HUB controller and USB-C Connectors based on USB-2. The project is made using KICAD for schematic and PCB and Fusion 360 for the 3D designing.
USB HUB is a custom designed USB HUB and is built using the SL2.1A USB HUB controller and USB-C Connectors based on USB-2. The project is made using KICAD for schematic and PCB and Fusion 360 for the 3D designing.
Unlike the another readymade hubs this USB HUB is made from the scratch from designing schematic to the PCB routing to the 3D designing.
This HUB allows 1 USB-C connection to expand into 4 USB-C port. It is useful for connecting multiple devices to 1 device.
Main components on the USB-HUB
USB-HUB bill of materials (BOM)
30 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SL2.1A | SO16 | U1 |
| 5 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1, J2, J3, J4, J5 |
| 1 | SD1206T020S1R0 | D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | LED_Small | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 5 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C5, C7, C9, C11 |
| 2 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3 |
| 4 | 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C6, C8, C10 |
| 2 | 5.1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 8 | 56K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R6, R7, R8, R9, R10 |
| 1 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
USB-HUB design files
The KiCad project lives in the avadsariya0-coder/USB-HUB repository on GitHub; these links point at the commit this page was built from.
- LayoutP.C.B/HUB.kicad_pcb
- SchematicP.C.B/HUB.kicad_sch
- BOMUSB HUB BOM.csv
USB-HUB: common questions
How big is the USB-HUB PCB?
The USB-HUB measures 34.5 × 40.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the USB-HUB?
30 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the USB-HUB design files?
From the avadsariya0-coder/USB-HUB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the USB-HUB design in my own project?
Yes, under the terms of its MIT license, which avadsariya0-coder chose for the repository.
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389