PRISM Power
AveragePillow17·P.R.I.S.M.·Hardware/CAD/KiCAD/prism_powerboard/PRISM_Power/PRISM_Power.kicad_pcb
About the PRISM Power PCB
PRISM Power is an open source STM32 PCB design by AveragePillow17, published on GitHub. It is a 2-layer board measuring 79.5 × 64 mm, with 52 components from 28 distinct parts.
Its main chip is the STM32G031F6PX, from the STM32 family. Other key parts include the LP875610RNFTQ1, BQ25895RTW, BQ297XY, MAX17048G+T10 and AMS1117-1.8. By type, the board carries 23 capacitors, 11 resistors, 6 ICs, 5 inductors, 2 transistors and 1 connector.
It belongs with the rf & radio and test & measurement designs in this gallery.
From the project
Portable Radio Instrument for Signal Monitoring
Portable Radio Instrument for Signal Monitoring.
- Mainboard KiCad project - Power-board KiCad project - Vivado FPGA project
Keep the schematic sheets, PCB, project files, and project-local libraries together inside their existing project directories. KiCad backup archives remain alongside their projects. Vendor packages, import instructions, and model archives are under Libraries.
Main components on the PRISM Power
PRISM Power bill of materials (BOM)
52 components, 28 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LP875610RNFTQ1 LP87564WRNFTQ1 | RNF0026C | IC2 |
| 1 | STM32G031F6PX STM32G031F6Px | TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | BQ25895RTW | RTW0024H | U2 |
| 1 | BQ297XY BQ297xy | WSON-6_1.5x1.5mm_P0.5mm | U3 |
| 1 | MAX17048G+T10 | 21-0168E_T822-3_MXM | U4 |
| 1 | AMS1117-1.8 | SOT-223-3_TabPin2 | U5 |
| 2 | AO3400A | SOT-23 | Q1, Q2 |
| 1 | UJ32-21-C-H-G-HMT-LT-P24-TR | UJ3221CHGHMTLTP24TR | J1 |
| 3 | — | MISO_1V8, NSS_1V8, SCK_1V8 | |
| 1 | THERMISTOR_NTC_10K Thermistor_NTC_10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | TH1 |
| 1 | 2.2UH 2.2uH | L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L1 |
| 4 | 0.47UH 0.47uH | L_Vishay_IHLP-1616 | L5, L6, L7, L8 |
| 3 | 100NF 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C6, C7 |
| 1 | 47NF 47nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 1UF 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 3 | 10UF 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C9 |
| 1 | 4.7UF 4.7uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 4 | 10UF 10uF | C_0805_2012Metric | C14, C15, C16, C17 |
| 4 | 22UF 22uF | C_1206_3216Metric | C18, C19, C44, C46 |
| 4 | 47UF 47uF | C_1206_3216Metric | C20, C43, C45, C47 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100NF 100nF | C_01005_0402Metric | C41 |
| 1 | 100NF 100nF | C_0201_0603Metric | C42 |
| 6 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6 |
| 1 | 5.23K 5.23k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 30.1K 30.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 260 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 1 | 2.2K 2.2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 330 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
PRISM Power design files
The KiCad project lives in the AveragePillow17/P.R.I.S.M. repository on GitHub; these links point at the commit this page was built from.
PRISM Power: common questions
What microcontroller does the PRISM Power use?
The PRISM Power is built around the STM32G031F6PX, from the STM32 family.
How big is the PRISM Power PCB?
The PRISM Power measures 79.5 × 64 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PRISM Power?
52 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PRISM Power design files?
From the AveragePillow17/P.R.I.S.M. repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PRISM Power design in my own project?
The repository has no license, so all rights stay with AveragePillow17. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PRISM Power without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in P.R.I.S.M.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k