9 open source boards using the BQ297xy
Real designs built with the BQ297xy, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Step devices
OlinSTEP
12 × 20 mm26 parts4LNo license3ESP32
Minimap
lucapoulos
48 × 55.4 mm74 parts4LNo license2Arduino weatherstation
AGVOLUTION
125 × 85 mm64 parts2LNo license2RP2040/RP2350
PortaPLUTO
kpezeshki
77 × 129 mm135 parts4LNo license1VikramSat Electrical-Power-Sub-System
Rishaan2202
72 × 72.1 mm123 parts2LMIT1AVR/Arduino
RPi-Minikeyboard
AbleArcher88
88.9 × 86.4 mm179 parts2LNo license0RP2040/RP2350
Flashlight power input dev
ahmadtak-3212
100 × 30 mm89 parts4LNo license0Lipo based power supply
Alexgichamba
71 × 41 mm41 parts2LMIT0STM32
PRISM Power
AveragePillow17
79.5 × 64 mm52 parts2LNo license0
How designs wire the BQ297xy
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the BQ297xy connects to, and the resistors, capacitors and other passives placed on it.
- The V- pin has a resistor to GND on 8 of 9 designs, most often 2.2 kΩ.
- The VSS pin has a series capacitor on 7 of 9 designs, most often 100 nF (then 4.7 µF).
- The BAT pin has a series capacitor on 6 of 9 designs, most often 100 nF.
- The BAT pin has a pull-up to BATT on 6 of 9 designs, most often 330 Ω.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 1 | Connected to: Not connected 100% | — |
| COUTpin 2 | Connected to: Signal 100% |
|
| DOUTpin 3 | Connected to: Signal 100% |
|
| VSSpin 4 | Connected to: A connector 33% |
|
| BATpin 5 | Connected to: Signal 100% |
|
| V-pin 6 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Step devices by OlinSTEP, Arduino weatherstation by AGVOLUTION, Minimap by lucapoulos and PortaPLUTO by kpezeshki.
The BQ297xy in open source designs
The gallery holds 9 open source boards using the BQ297xy from 9 GitHub repositories; a typical one measures about 77 × 64 mm and carries around 74 components.
56% are two-layer designs, the rest use four layers or more, and 22% carry an open source license.
The most starred is Step devices by OlinSTEP.
Microcontrollers on boards using the BQ297xy
What boards using the BQ297xy are built for
BQ297xy: common questions
Where can I find a BQ297xy reference design?
Each of the 9 boards on this page is a real design using the BQ297xy. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the BQ297xy V- pin?
The V- pin has a resistor to GND on 8 of 9 designs, most often 2.2 kΩ. Counted from the KiCad layouts of 9 open source designs using the BQ297xy.
How is the BQ297xy VSS pin connected?
The VSS pin has a series capacitor on 7 of 9 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 9 open source designs using the BQ297xy.
How is the BQ297xy BAT pin connected?
The BAT pin has a series capacitor on 6 of 9 designs, most often 100 nF. Counted from the KiCad layouts of 9 open source designs using the BQ297xy.
Which microcontrollers do boards using the BQ297xy use?
Most are built on RP2040/RP2350 (2), STM32 (2), AVR/Arduino (1) and ESP32 (1).
How big is a typical board using the BQ297xy?
The median is 77 × 64 mm, and 56% are two-layer designs.
What is the most popular open source board using the BQ297xy?
By GitHub stars, Step devices by OlinSTEP, with 3 stars.
Can I simulate one of these boards using the BQ297xy before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.