30 open source boards using the BQ25895RTW
Real designs built with the BQ25895RTW, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
SuperPower-RPi
SensorsIot
65 × 56.5 mm98 parts2LCERN-OHL-W-2.0601STM32
Keyword
notaroomba
19.1 × 19.1 mm69 parts4LNo license438PiFinder4
brickbots
98 × 75 mm150 parts4LGPL-3.0250Raspberry Pi
PiUPS
diminDDL
87.4 × 56 mm110 parts2LCERN-OHL-W-2.015ESP32
Tanmatsu hardware
Nicolai-Electronics
114.9 × 129.9 mm320 parts4LCERN-OHL-P-2.09ESP32
Why2025
ranzbak
114.9 × 129.9 mm327 parts4LNo license1Raspberry Pi
HACK CLUB RELATED
Studented0
88 × 155 mm93 parts4LMIT1ESP32
Unique-DAP
Oru-star
50 × 70 mm93 parts4LNo license1ESP8266
WeatherStation
aleksul
87.9 × 71.4 mm163 parts2LMIT0STM32
Prism mainboard
AveragePillow17
100 × 100 mm82 parts6LNo license0ESP32
Controller
someonelse20
125 × 95 mm59 parts2LNo license0STM32
OpenRow
set321go
51 × 60 mm55 parts2LMIT0Cm5-carrier
jl-grey-man
80 × 60 mm37 parts4LNo license0STM32
Trace reaper
jayis1
85.5 × 24 mm24 parts4LNo license3Raspberry Pi
HACK CLUB RELATEDbackup
Studented0
88 × 155 mm93 parts4LMIT1ESP32
ESP32-S3 GDEM102T91 Mainboard
ggkk0818
55 × 84 mm106 parts4LMIT0STM32
PRISM Power
AveragePillow17
79.5 × 64 mm52 parts2LNo license0Keyword bottom
notaroomba
19.1 × 19.1 mm34 parts4LNo license438ESP32
ESP32-S3 GDEM102T91 Mainboard
ggkk0818
55 × 84 mm106 parts4LMIT0ESP32
ESP32-S3 GDEM102T91 Mainboard
ggkk0818
55 × 84 mm106 parts4LMIT0ESP32
Stridophone — Bioacoustic Insect Detector
jayis1
90 × 60 mm18 parts2LNo license0STM32
ACOUSTIC-PHANTOM — Acoustic Side-Channel Analyzer
jayis1
120 × 22 mm20 parts4LNo license3ESP32
ESP32-S3 GDEM102T91 Mainboard
ggkk0818
55 × 84 mm106 parts4LMIT0ESP32
ESP32-S3 GDEM102T91 Mainboard
ggkk0818
55 × 84 mm106 parts4LMIT0ESP32
ESP32-S3 GDEM102T91 Mainboard
ggkk0818
55 × 84 mm106 parts4LMIT0ESP32
ESP32-S3 GDEM102T91 Mainboard
ggkk0818
55 × 84 mm106 parts4LMIT0ESP32
ESP32-S3 GDEM102T91 Mainboard
ggkk0818
55 × 84 mm106 parts4LMIT0ESP32
ESP32-S3 GDEM102T91 Mainboard
ggkk0818
55 × 84 mm106 parts4LMIT0ESP32
ESP32-S3 GDEM102T91 Mainboard
ggkk0818
55 × 84 mm106 parts4LMIT0ESP32
ESP32-S3 GDEM102T91 Mainboard
ggkk0818
55 × 84 mm106 parts4LMIT0
How designs wire the BQ25895RTW
Read from the KiCad layouts of 16 open source designs, one per repository: what each pin of the BQ25895RTW connects to, and the resistors, capacitors and other passives placed on it.
- The SW pins have a series capacitor on 12 of 14 designs, most often 47 nF (then 100 nF).
- The SW pins have a inductor on 12 of 14 designs, most often 2.2 µH (then 1 µH).
- The BTST pin has a series capacitor on 12 of 13 designs, most often 47 nF (then 100 nF).
- The VBUS pin has a decoupling capacitor on 11 of 13 designs, most often 1 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBUSpin 1 | Connected to: VBUS 92% |
|
| STATpin 4 | Connected to: Signal 85% · not connected 15% |
|
| SCLpin 5 | Connected to: The microcontroller 62%, a connector 38% |
|
| SDApin 6 | Connected to: The microcontroller 62%, a connector 38% |
|
| INTpin 7 | Connected to: The microcontroller 54% · not connected 23% |
|
| ILIMpin 10 | Connected to: Signal 92% |
|
| TSpin 11 | Connected to: Signal 93% |
|
| BATpin 13, 14 | Connected to: VBATT 52% · a signal 44% |
|
| SYSpin 15, 16 | Connected to: VSYS 78% |
|
| PGNDpin 17, 18, 25 | Connected to: GND 92% | — |
| SWpin 19, 20 | Connected to: Signal 96% |
|
| BTSTpin 21 | Connected to: Signal 100% |
|
| REGNpin 22 | Connected to: Signal 80% |
|
| PMIDpin 23 | Connected to: Signal 62% · not connected 31% |
|
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SuperPower-RPi-KiCAD by SensorsIot, Keyword by notaroomba, PiFinder4 by brickbots and PiUPS by diminDDL.
The BQ25895RTW in open source designs
The gallery holds 30 open source boards using the BQ25895RTW from 16 GitHub repositories; a typical one measures about 60 × 84 mm and carries around 106 components.
77% use four copper layers or more, and 63% carry an open source license.
The most starred is SuperPower-RPi-KiCAD by SensorsIot.
Parts used alongside the BQ25895RTW
Microcontrollers on boards using the BQ25895RTW
What boards using the BQ25895RTW are built for
BQ25895RTW: common questions
Where can I find a BQ25895RTW reference design?
Each of the 30 boards on this page is a real design using the BQ25895RTW. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the BQ25895RTW SW pin connected?
The SW pins have a series capacitor on 12 of 14 designs, most often 47 nF (then 100 nF). Counted from the KiCad layouts of 16 open source designs using the BQ25895RTW.
How is the BQ25895RTW BTST pin connected?
The BTST pin has a series capacitor on 12 of 13 designs, most often 47 nF (then 100 nF). Counted from the KiCad layouts of 16 open source designs using the BQ25895RTW.
What decoupling capacitors do designs use on the BQ25895RTW VBUS pin?
The VBUS pin has a decoupling capacitor on 11 of 13 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 16 open source designs using the BQ25895RTW.
What parts are used alongside the BQ25895RTW?
The 74LVC2G02HD4-7, AP3032KTR, BMI270, C426705 and C5180236 appear in the most repositories here.
Which microcontrollers do boards using the BQ25895RTW use?
Most are built on ESP32 (16), STM32 (7), Raspberry Pi (3) and ESP8266 (1).
How big is a typical board using the BQ25895RTW?
The median is 60 × 84 mm, and 23% are two-layer designs.
What is the most popular open source board using the BQ25895RTW?
By GitHub stars, SuperPower-RPi-KiCAD by SensorsIot, with 601 stars.
Can I simulate one of these boards using the BQ25895RTW before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.